Digital display pipeline surface pit depth measuring instrument

Product Introduction

Some metal objects may have small pits under natural corrosion. In order to effectively detect the depth of these pits and determine their impact on the entire pipeline, the digital pit gauge is a detection tool for pits. By selecting different specifications and models, it can effectively measure the depth values of pits on flat, partially concave, and partially convex surfaces. In addition, some molds may produce defects and dents during injection molding, mechanical processing, and vessel manufacturing, and digital dent detectors are also suitable for detecting such dents.

FS-10-UD-SDigital display pipeline surface pit depth measuring instrumentIt is mainly used for measuring the depth of corrosion pits on heated surface pipes caused by local thinning of pipe walls due to wear and corrosion of pipelines.

structural composition

It mainly consists of two parts: a digital display head and a testing base.

Digital pipeline surface pit depth measuring instrumentFeatures

1. Digital display, intuitive reading.

2. Used to detect the depth of small holes.

3. Compact and portable, easy to measure, and simple to operate.

4. Connect to the computer to collect data (customization required).

5. Reset to any position, convert between metric and imperial systems, and reset to zero.

6. It can have more testing requirements and be equipped with different precision and protection level headers.

7. The measuring base adopts a quasi circular arc design, which can effectively fit the surface of the pipeline (circular pipe), making it easier to observe the position of the measuring needle during measurement and reducing human errors.

FS-10-UD-SDigital display pipeline surface pit depth measuring instrumentTechnical specifications

Measurement range: 0-10mm

Resolution: 0.001mm

Accuracy: 0.005mm

Applicable pipe diameter: ≥ 5mm

Opening radius: 120 °

Opening size: 57mm

Measurement base size: 65mm

Measurement base material: metal

Measuring rod diameter: ≤φ 1.5mm

Power supply: 1.5V button battery

Working conditions:

Temperature: 0 ° C~+40C

Relative humidity:<80%

Storage and transportation temperature: -10 ° C~+60 ° C

Preparation before use:

1. Install batteries inside the instrument.

2. Instrument integrity check, check whether the appearance of the instrument is complete and whether the organic glass above the display screen is damaged.

3. Instrument performance inspection, testing whether the instrument can work normally.

4. Turn on the power button of the startup program. Operation steps:

1. Apply millimeter and inch conversion buttons according to the situation.

2. Place the instrument on the undamaged surface of the component to be measured and zero it.

3. After zeroing, place the instrument at the testing location to display the value of the corrosion pit.

If you want to measure another set of data, repeat the above steps.

Shutdown program: When the instrument is not in use, press the switch button to turn off the instrument.

Digital display pipeline surface pit depth measuring instrumentMaintenance

1. It should be kept clean regularly, handled gently, and wiped clean with a soft cloth after use.

2. The instrument should not be disassembled casually to avoid damage.

Digital display pipeline corrosion pit depth measuring instrumentAccessories included: instrument box, small wrench, test probe, spare battery, instruction manual, certificate of conformity, warranty card, 50mL bottle of cleaning solution, one wiping cloth, and a pair of gloves.