Diggor 22 C-U desktop centrifuge (industrial use)

Used for separating water and sediment in oil products, as well as for analyzing sediment and aggregates. The rotor can use 6-inch and 8-inch tubes, pear shaped tubes, and 12.5ml tubes, without heating function
*Maximum carrying capacity: 4 x100ml (8/6 "); Maximum centrifugal force/speed: 2425xg/3000RPM
*Compliant with standards: ASTM D 91, D 893,D 2273, D 2709, D 5546, API 2542, API 2548, BS 4385,DIN 51793.
*Non centrifugal state, centrifuge tube upright
*GRS: Exhaust system (optional accessory), pre installed

secure
*The safety system of centrifuge cover
-Automatic lock cover, mechanical double lock
-Emergency lid unlocking function
-Lock cover protection during operation
-Prevent sudden fall protection of the cover
-There is an observation hole on the cover for operation inspection
*Unbalanced check, automatic shutdown will occur
*There is a safety protection layer between the centrifuge chamber and the outer shell
*The centrifuge chamber is made of stainless steel material (easy to clean)
*The rotor can be disassembled when the cover is closed
*Both the rotor and adapter can be sterilized by high-pressure steam, making installation easy
*Forcing internal air flow can reduce temperature increase
*Energy saving setting with automatic power-off option

characteristic
TFT color display screen, observable distance exceeding 3m
*Display RPM/RCF, time, acceleration/deceleration digitalization (PCBS), with unbalanced positioning function (ULS)
*Speed control, step 10RPM/10xg
*Real time display function of RCF based on actual use of attachments.
*Positive or countdown function, reaching the set RPM/RCF timing function to ensure experimental reproducibility
*Timed program setting from 1min-99h, step by 1s, with step-by-step and stop program functions
*PCBS function: The progressive control acceleration and braking system can have up to 175 selectable slopes to prevent sample homogenization after separation.
*ULS function: In case of unbalanced situation, the unbalanced position number of the rotor will be directly displayed.
*40 sets of program memory with password protection function
*There are different prompt sounds and screen information prompts, which display the real-time operation status of the device

Easy to use
*Microcomputer program control
*Brushless maintenance free motor
*Rotor and adapter memory function
*Noise level, below 60dB
*There are functions for starting, stopping, opening the lid, and instantaneous centrifugation
*During operation, speed adjustment can be achieved through RPM/RCF.
*Can be programmed to automatically open the lid
*Automatically memorize the last parameter setting value
*Automatic turn recognition, overspeed protection

EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC
Execution standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1

Ordering Information