Diaphragm level switch GX series

Product Introduction

The MONITOR membrane level switch in the United States is composed of an economical, reliable, and durable single point control switch, which is used for single point control of dry powder levels. This system can be used to prevent overflow of the level, or to maintain the set level, display information on ramps or blockages during transmission, etc. The MONITOR membrane level switch can be installed, repaired, replaced, or sensitivity adjusted outside the container. In practical applications, it is not recommended to use it in environments where the material level is extremely light, viscous, or has large particles.

Technical Parameter

Power supply: No power supply required

Output: SPDT, 15A@480VAC

Sensitivity: GX-SS: minimum material density of 320kg/m3

Standard switch: minimum material density 240kg/m3

High sensitivity switch: minimum material density of 160kg/m3

Shell: Cast aluminum

Protection level: NEMA 4, IP65

Installation connection: flange with 7.5 "thread

Pressure level: Atmospheric pressure

Wiring: 1/2 "NPT

Pressure film material: chloroprene rubber; Teflon; 321SS (GX-SS only)

Operating temperature: G/GX chloroprene rubber: -40 ℃~+82 ℃

G/GX Teflon: -40 ℃~+121 ℃

GX-SS: -40℃~+121℃

Weight: G: 2.75lb; GX,GX-SS:3.25lb

Certification: G: CSA General Place

GX,GX-SS: UL&CSA Class Ⅱ

Div 1,2Groups F,G; CE certification

Container size: 12 '(small containers require adjustment and extension of padding)