Dewell 616KD Replacement Differential Pressure Transmitter

Used for monitoring differential pressure of air or other compatible gases, outputting a 4-20mA signal. Its casing is specially designed for installation on a 35 mm DIN rail inside the dashboard, which can save a lot of installation space when multiple transmitters are installed together. There are many range options to choose from, and the factory will calibrate special ranges. The range can be adjusted on site, but it cannot be significantly changed. The transmitter is powered by a two-wire circuit.

application

Air handling program

duct pressure

Variable air volume

Filter monitoring

It is designed specifically for easy operation, making it an ideal choice for installation and maintenance professionals. The single digit button, ZERO and SPAN are both calibrated correctly, with one click calibration. No additional reference pressure source or single calibration equipment is necessary.

Dewell 616KD Replacement Differential Pressure Transmitter

technical indicators

Media: Air and non combustible compatible gases

Accuracy: 1% FS

Temperature range: Operating temperature: -20~70 ℃, medium: 0~60 ℃, temperature compensation: 0~50 ℃,

Storage and transportation: -30~70 ℃

Pressure: Overload 10 times full range, damage pressure 15 times full range

Power supply: 17-35 VDC

Output signal: 4-20mA current output (two-wire) or 0-10V

Or 0-5V voltage output (three wire)

Zero point adjustment: dual buttons on the side or front

Output load: ≤ 500 Ω (current type), ≥ 2k Ω (voltage type)

Electrical connection: Top screw terminal block

Process connection: Direct insertion type, dual size can be connected to rubber or plastic pipes with inner diameters of 3mm or 5mm

Installation direction: Install in any direction

Terminal protection cover: not provided temporarily