DZ3201 UV aging test chamber

[DZ3201 UV aging test chamberScope of application:

Used for light resistance, weather resistance, and photo aging tests on various materials. Conduct exposure tests on samples in a controlled environment fluorescent ultraviolet lamp climate chamber. By simulating and enhancing environmental factors such as light, heat, humidity, and rainfall, which are the main aging damages in natural climate. By simulating accelerated tests under long-term exposure, the results of the material's weather resistance performance can be obtained.

[Compliant with standards]:

JTG E50，SL235，ASTM G153，ASTM G154，ASTM D4329，ASTM D4799，ASTM D4587，ISO4892 等。Note: Meet the above standards, but not limited to them;

[Instrument characteristics]：

1.The light source adopts8 imported ultraviolet fluorescent lamps with a rated power of 40W are used as the light source. Ultraviolet fluorescent tubes, distributed in machines

On both sides, each side4 pieces. There are UVA-340 and UVB-313 light sources for users to choose from and configure

2. boxShellThe inner liner is made ofSUS304 # stainless steel plate

3. adoptTrue color touch screenPID temperature intelligent controller with high temperature control accuracy and good stability

4.Over temperature protection inside the box: When the temperature inside the box exceedsAt 93 ℃± 10%, the machine will automatically cut off the electricity to the lamp and heater

Source supply and enter equilibrium state for cooling

[DZ3201 UV aging test chamberTechnical parameters:

1.Main features: automatic control of lighting, condensation, and circulation, real-time monitoring and display

2.Light temperature:50℃~70℃

3.Condensation temperature:40℃~60℃

4.Condensation method: steam humidification condensation

5.Temperature uniformity:±3℃

6.Temperature resolution:0.1℃

7.Humidity range: approximately45%~70% R.H (illuminated state)/98% or more (condensed state)

8.irradiance:1.2W／m2／340nm

9.illumination/Condensation cycle: 0-9999h59min can be set (e.g. 4H/4H or 8H/8H)

10.Center distance of lamp tube:70mm

11.Distance between the test sample and the lamp tube plane:50mm

12.UV lamp tube:UV-A340 or UV-B313 (optional)

13.Ultraviolet wavelength:（UVA）315～400nm； （UVB）280～315nm

14.studio dimensions：1140mm×400mm×380mm

15.Standard test piece:75 × 150mm orrootCustomized according to customer requirements

16.Control system: touch screen controller, real-time monitoring friendly interface, easy to useConvenient and easy to use.