DS1922L-F temperature recorder button memory

DS1922L Button Memory Temperature Recorder

Button Temperature Recorder DS1922LIt is a new type of temperature data logger with large capacity and high performance,An automatic temperature recorder with a diameter of approximately 17.3mm and a stainless steel casing,Record the measured temperature data in the memory. These records are collected at equal intervals ranging from 1 second to 273 hours.The recording frequency is customized by the user.Small volume can be used in many small volume testing environments.

Advantages:

Can be used for refrigerated trucks and temperature monitoring.DS1922T can be tested within a range of 0-125 degrees, with a wide temperature measurement range, while DS1922L can be tested within a range of -40 to 85 degrees

Small in size, with a diameter of about 1.7cm, it can test the temperature inside small volumes.

High resolution, available0.0625Degree and 0.5Two resolutions are available for selection,

Users can customize their choices and record time intervals.

Save the measured temperature in the memory according to the set recording interval, with built-in temperature sensor/calculator/clock/memory,

DS1922L Button Memory Temperature Recorder

Key Features

Working temperature range: DS1922T: 0--+125 ° C. DS1922L: -40°C --- +85°C；

After software calibration,The DS1922T has an excellent accuracy of ± 0.5 ° C within the range of+20 ° C to+75 ° C. The accuracy of DS1922L is better than ± 0.5 ° C within the range of -10 ° C to+65 ° C

The temperature alarm has programmable high and low trigger points,

Read data and set tasks through a USB reader.

All memory and configuration registers have two-level password protection.

Has UL # 913 (4th edition) standard; safetyEquipment: Certified for Level I, Zone 1, Groups A, B, C, and Zone D occasions

Automatically wake up and measure temperature, and save data in 8KB data recording memory in 8-bit or 16 bit format,Digital thermometers measure temperature with 8-bit (0.5 ° C) or 11 bit (0.0625 ° C) resolution.

The DS9107 iButton case can achieve water resistance or waterproofing (exceeding the requirement of 3 ATM waterproofing)

Sampling speed: from 1 secondUp to 273 hours.Programmable to start recording after a certain delay time, or to start recording after a temperature alarm is triggered.

DS1922L Button Memory Temperature Recorder