DPP-260K flat rapid blister packaging machine

NegotiableUpdate on 06/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This machine is a new type of flat rapid bubble wrap packaging machine innovatively designed by our company. The forming station, feeding station, and heat sealing/punching station are independently designed in three sections, which is different from the traditional flat machine structure. It has advanced functions, simple operation, and high output. It is an ideal choice for large and medium-sized pharmaceutical enterprises and health product production enterprises to choose fast and flat machines. This machine meets the requirements of the new GMP standard.

Product Details

characteristic

u Human machine interface PLC control, frequency conversion speed regulation, fault display, automatic alarm

u The forming station and heat sealing punching station adopt independent power transmission and dual servo traction, allowing the punching and forming ratio to be adjusted freely between 1:2:3:4

u The whole machine is divided into three parts, and the worktable can be extended as needed. It is easy to disassemble and assemble, making it convenient for transportation into the workshop and the cargo elevator

u The mold adopts a guide rail type, with precise positioning and installation. The entire mold can be disassembled and installed in only 30-60 minutes

u The punching structure adopts a cross shaped design, greatly saving packaging materials

u Additional detection and removal devices can be added as needed for the production of aluminum-plastic pillow and aluminum-plastic box connections

Main technical parameters

u Punching speed (standard version 80 * 57): 30-90 times/minute

u Power supply (three-phase four wire): AC380V/50Hz 10.5Kw

u Maximum production capacity: 210000 pieces/hour

u Optional range of feed stroke: molding ≤ 180mm, maximum heat sealing ≤ 110mm

u Maximum molding area: 250 * 170 * 14mm

u Forming heating power: 6Kw

u Heat sealing heating power: 2Kw

u Molding motor and heat sealing motor power: 0.75Kw 1.5Kw

u Air pump pressure: 0.6-0.8MPa