DP-TS5000 UV Fluorescence Sulfur Analyzer

The instrument is widely used for the detection of total sulfur content in various oil products (diesel, gasoline, kerosene, lubricating oil, fuel oil, paraffin oil, solvent oil, crude oil, etc.) and natural gas, liquefied gas in refineries, oil depots, import and export commodity inspection, environmental protection, scientific research institutions and other enterprises, as well as the detection of total sulfur content in chemical products of large, medium and small chemical enterprises.

Technical Indicators:

• Sample types: liquid, solid, and gas samples

• Measurement method: UV fluorescence method

• Sample injection volume: Solid sample volume: 1-20 mg

  Liquid sample volume: 1-20 µ L

  Gas sample volume: 1-10 mL

• Measurement range: 0.2 mg/L to 1%

• Detection limit: 0.1 mg/L

• Detection limit: 0.05 mg/L

• Temperature control range: Room temperature to 1100 ℃

• Temperature control accuracy: 0.5% ± 2 ℃

• Gas source requirements: Argon gas: above 99.995% Oxygen gas: above 99.99%Humidity: less than 5ppm

• Power supply: AC220V ± 22V 50Hz ± 0.5Hz Power: 1500W

• Dimensions: 580 × 520 × 400 (mm)

• Weight: Host: 20kg Temperature Control: 30kg

  Main features:

• Key components such as UV lamps and 0 filters are all adopted internationally todayThe original components ensure the instrument's ultra-high sensitivity and reliability.

• adoptImported Nafion from the United StatesTube membrane dryer with good water removal effectThis ensures the stability of the instrument.

• It can establish and save working curves, and sample analysis can be carried out at any time by accessing them, without the need to repeatedly establish working curves.

• By selecting gas or solid injectors, sample analysis of gases, viscous liquids, solids, etc. can be carried out to meet various testing needs.

• The Chinese operating interface developed based on Windows is easy and fast to operate. 0

  Instrument execution standard:

• SH/T 0689-2000 Determination of Total Sulfur in Light Hydrocarbons, Engine Fuels, and Other Oil Products by UV Fluorescence Method

• GBT 11060.8-2012 Determination of Sulfur Compounds in Natural Gas Part 8 Determination of Total Sulfur Content by UV Fluorescence Method

• ASTM D5453－12Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence.

• ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence.

  Standard configuration:

  DP-TS5000One set of UV fluorescence sulfur analyzer (including liquid sampler), one set of computer,DP-TS5000A set of analysis system software.