DLD type guided wave radar level gauge C (0-6m)

NegotiableUpdate on 07/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The DLD guided wave radar level gauge can emit high-frequency microwaves that propagate along the probe rod. Due to encountering the measured medium, the dielectric constant undergoes a sudden change, causing reflection

Product Details

DLDThe guided wave radar level gauge can emit high-frequency microwaves that propagate along the probe rod. Due to encountering the measured medium, the dielectric constant undergoes a sudden change, causing reflection. The time interval between the emitted pulse and the reflected pulse is proportional to the distance of the measured medium. Meanwhile, guided wave radar can also measure the interface between two different media, fully utilizing the difference in dielectric constant of the media. But the measurement condition is that the upper layer medium is non-conductive, or its dielectric constant is more than 10 times smaller than that of the lower layer medium. The pulse working mode can measure small dielectric constant media and is safe for use in various metal and non-metal containers, without harm to human body and the environment. Product applications include coal plants, power plants, petrochemicals, food industries, and general industrial applications.

1、 Product features:
1.Can measure any medium with a dielectric constant greater than or equal to 1.4;

2.Suitable for measuring viscous liquids or situations with large temperature and pressure changes;

3.It is suitable for measuring obvious volatile gas medium, foam, wall hanging and scaling, surface fluctuation, bubbling or boiling, high-frequency loading and unloading, and ultra-low liquid level conditions;

4.Applications of media with changes in dielectric constant or specific gravity;

5.Output signal 4-20mA/HART;

6.Used for solid particles and powder media;

7.A medium with high dust emissions.

2、 Technical parameters:

Model number	DLD-A	DLD-B	DLD-C
Application scope	Suitable for a large number of processes. Can measure solid and liquid media. Suitable for complex measurements, liquid and solid granular media, and high dust environments.	Suitable for measuring solid and liquid media, as well as powder particle media.	Suitable for measuring solid and liquid media, and can be used for liquids with relatively low dielectric constants.
measuring range	0~25 meters	0~6 meters
Connection method	（G1-1/2″，1-1/2″NPT）， Flanges (DN50/80/100/150)
Warehouse opening	Thread (Φ 40), flange (DN50 Φ 60/DN80 Φ 90/DN100 Φ 110/DN150 Φ 160mm)
operation temperature	-40～350℃
Working pressure	-1.0～4.0 MPa
Antenna material	stainless steel
accuracy	<0.2% (top blind spot 500mm)
pick appearance	Echo sampling 55 times/second
Explosion proof grade	EXiaIICT6/ExdIICT6
protection grade	IP66
signal output	Two wire 4-20mA/HART or three wire 4-20mA
Antenna material	stainless steel
Power supply mode	Power supply: 24VDC (± 10%); Ripple voltage: 1Vpp; Power consumption: Maximum 22.5mA
ambient temperature	-40～80℃
Display mode	LEDdisplay
cable interface	M20×1.5

2、 Product selection table:

DLD	A	Cable probe									Probe form
	B	Horizontal bar probe
	C	Parallel rod probe
		P	Standard type (non explosion proof)								explosion-proof
		I	Intrinsic safety type（Exia II CT6）
		F	Explosion proof type（Exd II CT6）
			1	threadG1-1/2″							Connection method
			2	thread1-1/2″NPT
			3	flangeDN50 PN1.6（HG2094-97）
			4	flangeDN50 PN1.6（HG2094-97）
			5	flangeDN50 PN1.6（HG2094-97）
			6	flangeDN50 PN1.6（HG2094-97）
				1	carbon steel						material
				2	stainless steel
					□	（mm）					Probe range length
						0	Atmospheric pressure				Working pressure
						1	1.6 MPa
						2	2.5 MPa
						3	4.0 MPa
							M	ordinary-40~150℃			operation temperature
							H	high temperature-40~230℃
							G	Ultra high temperature-40~350℃
								Y	belt		The programmer
								N	without
									1	two-wireDC24V 4~20mA/HART	Connection
									2	Three-wireDC24V 4~20mA
DLD											notes