DAKOTA NDT Precision Ultrasonic Thickness Gauge from the United States

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

DAKOTA NDT Precision Ultrasonic Thickness Gauge PZX1/PZX1-DL (Standard Probe) Standard Delay Block Probe T-402-5507 Measurement Range: 0.152-25.4mm Probe Frequency: 15MHz Chip Size: 6.35mm More probes with different range are available for consultation.

Product Details

DAKOTA NDT Precision Ultrasonic Thickness Gauge from the United StatesPZX1 / PZX1-DL

Introduction

DAKOTA NDT Precision Ultrasonic Thickness Gauge from the United StatesPZX1 and PZX1-DL have the characteristics of high precision and high resolution. Equipped with multiple measurement modes, multiple diameter, high-frequency or low-frequency probes can be selected to solve many potential applications. In the echo echo mode, the thickness of the material can be measured without removing the paint or coating.

Characteristics
Design of 120MHz FPGA Timing Circuit
100V sharp pulse generator
Multiple measurement modes: pulse echo mode, echo echo mode, interface echo mode, plastic mode
Automatic Time Dependent Gain (TDG), manual priority
Single crystal delay block probe and contact probe (5-20MHz)
Low temperature customized LCD display screen (-30 ℃)
CDC compatible interface, optional serial RS232 or Bluetooth module
USB Type-C data interface
32M flash internal data storage, capable of storing 40 sets of 250 data per set, totaling 10000 data (PZX1-DL only)
IP65 protection level

DAKOTA NDT Precision Ultrasonic Thickness Gauge from the United StatesPZX1 / PZX1-DLTechnical parameters

measurement
	Pulse echo mode measurement range: 1.0~914.4mm (steel) Echo echo mode measurement range: Delay block probe 0.152-25.4mm; Contact probe 1.0-152.4mm Interface - Echo Mode Measurement Range: Delay Block Probe 1.524~25.4mm Plastic mode measurement range: graphite delay block probe 0.127-6.35mm, depending on material, probe frequency, and diameter Units: Imperial and Metric Resolution: 0.01 or 0.001mm Speed range: 305~18542m/s Pulse repetition frequency: 200Hz Display refresh rate: 10Hz Gain: automatic and manual control Time dependent gain (TDG): implemented in all measurement modes
	display
	Multi functional 7-segment 4-digit LCD display with a digital height of 12.7mm Two 3.2mm high 14 segment display areas and one 7-segment display area for displaying information and numerical values Additional icons represent functions and modes Backlight selectable (on/off/automatic), brightness selectable (low/medium/high) Stability indicator: indicates the stability of the measured value
	function
	Probe types: monocrystalline delay block probe and contact probe (optional diameter of contact probe) High speed scanning mode: displays the minimum reading during the scanning period, with a scanning frequency of 100Hz Difference mode: Display the difference between the measured value and the nominal value Alarm mode: upper and lower limit sound and light alarm Sound velocity measurement mode: used for measuring spheroidization rate
	probe
	5-20MHz single crystal delay block probe and contact probe LEMO 00 interface, 1.2-meter probe cable Customizable probes for special applications
	storage
	Can store 40 sets, each containing 250 pieces of data, for a total of 10000 pieces of data (PZX1-DL only)
	other
	Keyboard: Waterproof and oil resistant sealed key film, nine tactile feedback keys Power supply: Comes standard with two No. 5 alkaline batteries, with optional nickel cadmium or lithium batteries. Power status indication. Automatically shut down after five minutes of inactivity. USB Type-C power supply. Size and weight: 63.5x131.3x31.5mm, 312g (including battery) Operating temperature: -30~75 ℃ Shell: extruded aluminum shell, bottom cover made of nickel plated aluminum, environmentally friendly packaging Packaging: ABS engineering plastic box Factory certificate: Factory calibration can be traced back to NIST and MILSTD-45662A standards

美国DAKOTA NDT精密型超声波测厚仪

Standard optional

Probe model	frequency	wafer diameter	measurement range	Explanation
T-402-5507	15MHz	6.35mm	0.152~25.4mm	Standard Delay Block Probe (Standard Probe)
T-402-6507	20MHz	6.35mm	0.152~19.05mm	Delay block probe

Optional probe

Accessory name	model	Explanation
Contact probe	T-4903-2875	5MHz， Chip diameter 3.18mm
Contact probe	T-4903-4875	10MHz， Chip diameter 3.18mm
Contact probe	T-4023-2855	5MHz， Chip diameter 6.35mm
Contact probe	T-4023-4855	10MHz， Chip diameter 6.35mm
Standard Delay Block	F-000-7102	Diameter 6.35mm, length 9.5mm
Standard Delay Block	F-000-7103	Diameter 6.35mm, length 12.7mm
Cone shaped delay block	X-132-0000	Front end contact diameter 3.18mm, length 9.5mm
Cone shaped delay block	X-532-0000	Front end contact diameter 4.76mm, length 9.5mm
Graphite Delay Block	X-633-0000	Front end contact diameter 4.76mm, used for measuring plastic
Probe line	N-104-0020	1.2 meters long