DA9830 Single Drive

Servo drive model:DA9830 Single Drive

Power: The servo drive is compatible with a power of1.2KW~2.6KWelectrical machinery
The independently developed new generation fully digital AC servo drive mainly adopts the latest digital signal processorDSPTechnology and large-scale programmabilityFPGATechnology centered computing unit and intelligenceIPMThe power module has a series of advantages such as fast response speed, complete protection, and high reliability.
The speed regulation ratio is1：5000It has stable torque characteristics from low speed to high speed
Control positioning accuracy±0.01%,300%Overload capacity
Using space vector control algorithm, compared to ordinarySPWMGenerate greater torque and lower noise
Complete protection functions: overcurrent, overvoltage, overheating, and encoder failure
Multiple display functions: including motor speed, motor current, motor position, position deviation, number of pulses, pulse frequency, linear velocity, input/output interface diagnosis, historical alarm records, etc
DSD10The servo drive is a base mounted servo drive
Storage conditions:When storing servo drives in an unpowered state, please store them within the following temperature range:-20 ～ +85 ℃installation site
Environmental conditions inside the control cabinet:
1.Environmental temperature of servo drive:0~ 55
2.℃Humidity:90%RH
3.Below (relative humidity)Vibration:
4.4.9m/s2
5.Do not experience freezing, condensation, or other phenomena45 To ensure long-term reliability, please use below℃
Used under ambient temperature conditionsInterface with analog command input circuit:The analog signals are speed command signals and torque command signals, with a command input impedance of approximately40kΩThe maximum allowable voltage for the input signal is±10VInterface with input circuit:Connect using relay or open collector transistor circuits. When using a relay connection, please select a relay for small currents. If a small current relay is not used, it will cause poor contact. Interface with bus driver output circuit:2Convert the encodereach other(AXiang,Beach other)Pulse output signal(PAO、/PAO、PBO、/PBO)Pulse signal at the origin(PCO、/PCO)Output through the bus driver output circuit. Usually used when constructing a position control system on the upper device side. On the upper device side, please use a line receiving circuit to receive. Interface with output circuit:

The output signals for servo alarm, servo readiness, and other sequences are composed of optocoupler output circuits. Connect using relays and wire receiving circuits.