Crystalline air-cooled vacuum pulverizer

Crystalline air-cooled vacuum pulverizerFL series air-cooled dust removal crusher

It is mainly suitable for the crushing and processing of low to medium hardness materials in pharmaceuticals, chemicals, and food (such as ginger, chili, pepper, oil wheat, soybeans, white sugar, star anise, cinnamon). It has the advantages of high yield, fine particle size, low noise, low energy consumption, simple maintenance, and easy installation. It is particularly suitable for the crushing and processing of low hardness materials such as oil, viscosity, heat sensitivity, and fiber.
Crystalline air-cooled vacuum pulverizerFL series air-cooled dust removal crusherWorking Principle:

When the pulverizer rotates, the motor drives the spindle and cutterhead to rotate at high speed. The grinding blocks on the cutterhead and screen ring form a crushing and grinding pair. When the material enters the machine cavity from the feeding hopper, it tightly rubs and strongly impacts the inner side of the blades of the cutterhead in the rotating airflow of the cutterhead, and grinds again in the gap between the blades and the grinding blocks. At the same time as crushing materials, the cutterhead sucks in a large amount of air, which plays a role in cooling the machine, grinding materials, and conveying fine materials. The fineness of material crushing depends on the properties of the material and the size of the sieve, as well as the throughput of the material and air. The bearing components of the air-cooled crusher are equipped with specially designed labyrinth seals, which can effectively prevent dust from entering the bearing chamber, thereby extending the service life of the bearings. The machine door is equipped with a silicone rubber sealing ring, which prevents dust leakage and pollutes the operating environment.
FL series air-cooled dust removal crusherFeatures:

1. Strong crushing ability, low energy consumption, and relatively small product fineness.
2. The crushing space is large, and the high-strength wind pressure generated during the operation of the cutterhead can not only improve production capacity and reduce over crushing, but also effectively avoid the sedimentation and blockage of the sieve caused by the material during the crushing process.
3. Due to enhanced shearing, the crushing ability of fibrous materials is higher than that of general equipment.
4. The installation of the screen mesh is convenient and the positioning is reliable, all of which are inserted. The service life is much longer compared to the ring screen form.
5. Design a built-in motor to lower the center of gravity of the machine, effectively reducing equipment noise.

Technical Specifications