Crystal lamp cleaning machine

Product introduction: After a certain period of time, if the crystal lamp is not cleaned for a long time, it will affect the lighting level of the lamp. Therefore, it needs to be cleaned regularly and cleaned with a special cleaning agent. Cleaning equipment: Large batch lamp cleaning - ultrasonic cleaning equipment

After a certain period of time, if the crystal lamp is not cleaned for a long time, it will affect the lighting level of the lamp. Therefore, it needs to be cleaned regularly and cleaned with a special cleaning agent.

Cleaning equipment:

Large scale lamp cleaning - ultrasonic cleaning equipment

The high-frequency oscillation signal emitted by the ultrasonic generator is converted into high-frequency mechanical oscillation by the transducer and propagated to the medium. The ultrasonic waves in the cleaning solvent radiate forward in a sparse and dense manner in the cleaning solution, causing the liquid to flow and generate tens of thousands of tiny bubbles. The tiny bubbles (cavitation nuclei) existing in the liquid vibrate under the action of the sound field. When the sound pressure reaches a certain value, the bubbles rapidly grow and then suddenly close. When the bubbles close, a shock wave is generated around them, causing thousands of atmospheric pressures to break up insoluble pollutants and disperse them in the cleaning solution. When the group particles are wrapped in oil and adhere to the surface of the cleaning part, the oil is emulsified, and the solid particles detach, thus achieving the purpose of purifying the surface of the cleaning part.

Introduction to ultrasonic cleaning process for several common surface conditions of workpieces:

1. Cleaning of polishing paste on the surface of polished parts

In general, polishing paste is often mixed with paraffin wax, which has a high molecular weight and melting point. It is a solid substance at room temperature and is difficult to clean. The traditional method of cleaning with organic solvents or high-temperature alkaline water has many drawbacks. If ultrasonic cleaning is used, water-based cleaning agents can be used to thoroughly clean the surface of the workpiece within a few minutes under medium temperature conditions. The common process flow is: ① soaking → ② ultrasonic cleaning → ③ rinsing with clean water (purified water).

2. Cold rolled steel plates with oil and a small amount of rust on the surface

Cold rolled steel plates usually have oil, dirt, or a small amount of rust on the surface, which is relatively easy to clean. However, after general cleaning methods, a very thin layer of floating ash still remains on the surface of the workpiece, affecting the quality of subsequent processing. Sometimes, it is necessary to use strong acid soaking to remove this layer of floating ash. By using ultrasonic cleaning and adding appropriate cleaning solution, the surface of the workpiece can be thoroughly cleaned conveniently and quickly, and the workpiece surface can have high activity. Sometimes, it can even eliminate the acid immersion activation process before electroplating.

The traditional method for cleaning workpieces with oxide scale and yellow rust on the surface is to soak them in hydrochloric acid or sulfuric acid. If ultrasonic comprehensive treatment technology is used, oil and rust on the surface of the workpiece can be quickly removed within a few minutes, and hydrogen embrittlement caused by strong acid cleaning can be avoided.

Applicable lighting fixtures:

Crystal candle lamp, crystal clip lamp, crystal wall lamp, crystal table lamp, crystal pendant lamp, crystal engineering lamp, modern crystal lamp, European crystal lamp, traditional crystal lamp, glass crystal lamp

Notes:

Crystal lamps are generally installed at a certain height, and a complete set of safety operation plans must be provided when cleaning the crystal lamps. The cleaning and maintenance of large crystal chandeliers often require high-altitude operations (operations above 2 meters above the ground belong to the high-altitude category), and great attention must be paid to the safety of staff, work platforms, and lighting fixtures.

During the cleaning process, if replacing light bulbs, it is recommended to choose high-quality and long-lasting branded products to avoid uneven brightness and affect overall aesthetics.

When cleaning and replacing crystal beads, if possible, if you used to choose low-grade crystal beads, you can consider switching to high-quality high-grade crystal beads; High quality premium crystal beads have a dust-proof treatment process on the surface, which makes them less prone to dust and has a good effect. Usually, it is important to avoid damage from oil fumes to crystal lighting fixtures in order to maintain the long-lasting clarity and transparency of crystal balls or pieces.

Refurbishment of lamp frame: A truly electroplated lamp frame can generally maintain its color for three to five years or longer without fading; You can consider turning on the power again in three years, which will give you a brand new feeling.

Regular inspection: The safety and stability of lighting fixtures hung in important locations or places with frequent human traffic should be of the highest level. Headlights often weigh several hundred kilograms, and if they were to deteriorate, the consequences would be unimaginable. Therefore, it is necessary to regularly send people to inspect the embedded parts, load-bearing hooks, and hanging chains hidden in the ceiling to prevent aging from going unnoticed and causing accidents. Foshan Cleaning Company

Timely update: If possible, the performance of the internal wires should also be checked for integrity. If any sticking or aging is found, they should be replaced immediately to ensure safety.

Professional maintenance: For large lighting fixtures with complex circuits (with graded lighting), Tianhao hires professional technicians for cleaning and maintenance, which is not expensive, easy to repair, and safe and reliable.

Generally, only one to two cleanings per year are needed to maintain a beautiful and charming appearance.

Although the appearance of a crystal lamp is very dazzling, it still requires a lot of effort in later maintenance. Crystal lamps are particularly susceptible to dust and stains, and require regular cleaning to remove any attached dust and stains in order to ensure the dazzling light and noble quality of the crystal lamps. However, due to the high position of the crystal chandelier and the complicated cleaning process, Tian Hao had it cleaned by professionals. The manufacturers of crystal lamps purchased by ordinary consumers will have professional cleaning personnel responsible for on-site cleaning, but they will also charge corresponding fees.

Of course, if consumers want to clean themselves, Tian Hao can purchase specialized cleaning agents and spray them on crystal lamps. The cleaning agents will evaporate along with dust and stains; You can also remove the crystal pendant and soak it in kerosene. After the stain softens, clean it with laundry detergent, air dry it, and then install it again. Consumers should be reminded to pay special attention to safety when cleaning crystal lighting fixtures themselves. Firstly, cut off the power supply. When wiping the light bulb, remove it first and try to avoid touching the lamp interface with a damp cloth; Tian Hao chooses a soft cotton cloth for wiping; When disassembling crystal pendants, the principle of symmetry should be followed to maintain the balance of the lamp and prevent the bracket from deforming; Do not use alcohol when wiping the gold-plated metal bracket to avoid damaging the electroplated outer film and affecting its appearance; When cracks or defects are found in the pendant, they should be replaced in a timely manner to ensure safety and overall aesthetic effect.