Connecting rod float level switch/controller

The HY-UQK connecting rod float level switch/controller consists of two parts: a level sensor and a current converter. The float changes synchronously with the liquid level, controlling the suction and disconnection of the reed switch to make the resistance inside the sensor change linearly. The converter then converts the resistance change into a 4-20mA standard current signal and superimposes it with a digital signal for output. It can display, alarm and control the liquid level of the medium in open, closed containers or underground tanks in the instrument control room. The detected medium can be water, oil, acid, alkali, industrial sewage and other conductive and non-conductive liquids, and can overcome the influence of false liquid level caused by liquid foam. Widely used in industries such as refining, chemical, papermaking, food, and wastewater treatment.

The HY-UQK connecting rod float level switch/controller is suitable for liquid control of various containers. When the liquid level reaches the upper and lower switching values, the controller contact sends an on-off switch signal. The product series is divided into two categories: explosion-proof and non explosion-proof. The explosion-proof type can be used for liquid level control of pressure vessels with flammable and explosive media of Class 1.2 and Groups A, B, and C. The controller is not suitable for media that have strong corrosive effects on materials such as brass and stainless steel, as well as media containing magnetic impurities.

Easy installation and simple structure

Reliable performance

Corrosion resistant and explosion-proof

Strengths Analysis

Simple structure: Without any movable or elastic components, it has extremely high reliability and minimal maintenance.

Easy installation: The built-in structure particularly demonstrates this feature, without the need for any specialized tools.

Easy adjustment: The zero position and range potentiometers can be used to freely shift the zero position or change the range within the effective range of liquid level detection, and the two adjustments do not affect each other.

Widely applicable; Suitable for liquid level measurement in media with high temperature, high pressure, strong corrosion, etc.

Measurement range: Within L: 0~6000mm, users can choose freely.

Output signal: 4~20mA DC

Accuracy: ± 10mm

Medium density: ≥ 0.7g/cm

Medium viscosity: ≤ 1.25 St (1=10m/S)

Working temperature: -40~+60 ℃

Load impedance: 620 Ω

Supply voltage: 24VDC

Outlet connector: internal thread M20 × 1.5

Connection flange: HG20592~20635-97 DN150 PN1.6, 2.5MPa, other flange standards such as GB, HGJ, ANSI, etc. are specified by the user

Explosion proof mark: Explosion proof type dIIBT4

Float material: 0Cr18Ni9, polytetrafluoroethylene

Effective detection range: 0-0.2-20m

Accuracy: Level 0.5, Level 1, Level 1.5

Pressure bearing range: negative pressure, normal pressure, high pressure (below 32MPa)

Working temperature: -50~240 ℃

Environmental temperature: -20~75 ℃

Applicable medium: acid, alkali, salt or any medium that is non corrosive to polytetrafluoroethylene

Output signal: 4-20mA, two-wire system

Power supply: Load resistance 0-750 Ω DC24V

Fixed method: thread installation M20 × 1.5, M27 × 2 flange installation DN15, DN25, DN50, DN80

Model

Model specifications

Marking example: UQK-80S-A4EF-1.2-2.5-2000, L1=1800mm descending connection, L2=1600mm descending connection, L3=400mm ascending connection, L4=200mm ascending connection.

Precautions

If not specified, the upper and upper limits are set to connect as the liquid level increases, while the lower and lower limits are set to connect as the liquid level decreases.

When used in situations where the liquid fluctuates greatly, in order to prevent misoperation, please install anti fluctuation devices.

When the float moves up and down, it should be unobstructed. If there are foreign objects in the liquid, please do not use a float level switch.

If the switch signal is connected to the control circuit, it is recommended to use it together with the DF-1A conversion amplifier produced by our company.