Conductivity analysis instrument

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The conductivity analyzer is a brand new conductivity/resistivity controller with high intelligence and flexibility. It can simultaneously measure conductivity/resistivity and temperature, and is widely used in urban sewage treatment plants, water supply, chemical industry, and other industries to continuously measure residual conductivity/resistivity of solutions.

Product Details

Basic functions

1. Language diversityFactory standard Chinese interface, switchable English interface

2. Multiple temperature compensation options including PT1000 NTC10K and manual temperature compensation

3. Two 4-20mA outputs, corresponding to conductivity/resistivity values and temperature, using isolation technology with strong anti-interference ability

4. The high and low points of the two sets of relays can be switched freely, and the hysteresis can be adjusted freely to avoid frequent on-off of the relays

5. Password management function to prevent misoperation by non professionals

6. Menu prompt function greatly facilitates user operation

Instrument technical parameters

Measurement range: 0.05uS/cm – 200mS/cm 0.00 MΩ·cm～20.00 MΩ·cm

Accuracy:+ 0.01 uS/cm

Resolution:0.01 uS/cm

Temperature compensation:0–100 ℃

manual/Automatic (PT1000/NTC10K)

Signal output: 4-20mA isolated protection output, independently corresponding to maximum load of 500 Ω for conductivity/resistivity or temperature

Alarm output: Two groups can correspond to high and low point alarms at will（3A/250 V AC）， Normally open contact relay

Power supply:AC220V or DC24V

Power consumption:≤5W