Concrete pole detector

Concrete pole detectorThe functions are as follows:

（1）Diameter230mmUp to and including, length15Mechanical performance tests for pole shapes of meters and below.

（2）The detector can automatically complete the operation of getting on and off the equipment through the intelligent hydraulic system of the device, without the need for other auxiliary equipment; The platform level can be calibrated through the dual hydraulic support legs provided by the device.

Concrete pole detectorParameters are as follows:

（1）Load range of force sensor:0~20 kNLinear accuracy±0.03≤%F. S.

（2）Displacement sensor3One. Displacement sensor at the fixed position of the root2One, measure the journey100mmLinear accuracy0.03mmDisplacement sensor at the tip of the pole1One, measure the journey,2000mmComprehensive accuracy ±0.1%F.S.

（3）Power supply method: lithium battery pack (lithium iron phosphate),voltage24V,Capacity ≥150AH；

（4）Power parameters: AC servo power1.5kWHydraulic power unitRKplunger pump60MPa; DC power24VThe4kWGear pump12MPa；

Supporting specialized software:

1Test plans can be configured according to different specifications of poles, and automatic curve chart machine test reports can be generated;

2Data display interface, current data during pole test loading and data calculated after the test;

3The file data can be queried and a report can be generated after completing the experiment, and the report can be saved elsewhere;

Loading force curve display, this curveXThe axis represents time,YThe axis represents the current loading force value;

5. Dimensions of the unfolded state of the detector: length x width x height≤15200×3850×1900mm; Retraction status dimensions: length x width x height≤4700×2000×1500mm；

6Total mass≤4.3Ton;