- Phone
-
Address
2-1308, Block C, Poly Center, No. 333 Jingyi Road, Huaiyin District, Jinan City, Shandong Province
Product Categories
Sichuan Changjiang Paper Instrument Co., Ltd
Computer measurement and control softness meter
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Computer measurement and control softness tester main technical parameters, technical indicators, measurement range (10-1000) mN
Product Details
Computer measurement and control softness meterMain technical parameters
| Parameter project | Technical indicators | |
| measurement range | （10～1000）mN, resolution1mN | |
| Accuracy of indication | indication error | ±1% |
| indication variability | ≤1% | |
| Total travel of measuring head | 12mm | |
| Depth of probe insertion | 8+0.5 0mm | |
| Sample table slit width (four levels) | 5mmThe6.35mmThe10mmThe20mmWidth error of each level ±0.05mm | |
| Parallelism error on both sides of the slit of the sample table | ≤0.05mm | |
| Measurement head for neutral error | ≤0.05mm | |
| Dimensions (length x width x height) | 570mm×410mm×200mm | |
| quality | about33kg | |
| Note: When measuring the upper limit value20%Below, the accuracy of the displayed values is allowed to fluctuate up and down outside the range specified in the table above1mN. | ||
Environmental conditions for normal operation of the instrument
Room temperature: 10 ℃ to 30 ℃.
Power supply voltage: AC220V ± 22V, 50Hz, 5A, the power supply should be reliably grounded. If the voltage fluctuation of the power supply exceeds the above range, a power stabilizer should be used.
The working environment is clean, the workbench is flat and stable, there is no vibration source, and there are no corrosive gases.
Similar Product Recommend
