Composite material high-temperature creep testing machine

Composite material high-temperature creep testing machineProduct Introduction

Composite material high-temperature creep testing machineUsed for plastics\\Fiber reinforced plastic\\Measurement and configuration of mechanical test properties such as tensile creep and bending creep of composite materialsFLProfessional high-temperature creep deformation material device, creep testing software, etc., can automatically calculate the tensile creep amount and creep modulus-Time, creep fracture, creep curve, stress-strain parameters, etc.

Test standard:

Testing machine standard：Q/FL2020High temperature creep endurance test system for materials；

Inspection Standard：JJG276-2009High temperature creep and endurance strength testing machineISO899Standards for determining the creep properties of plastics, etc；

Main technical specifications and parameters：

1.Specification Model：FLEC204，FLEC304，FLEC504；

2.Rated test force specification：0-20KN，0-30KN，0-50KN；

3.Accuracy level of testing machine：1level/0.5level；

4.Test force measurement range：1%-100%FS；

5.Relative error of test force indication：≤ ± of the indicated value1%/± of indication value0.5%；

6.Test temperature range：room temperature~200℃, room temperature~350℃, room temperature~450Customizable at ℃ and other temperatures；

7.Testing machine speed：0.001～100mm/minSettings can be made through the control panel or testing software

8.Test Method：High temperature tensile creep method or high temperature bending creep test method

9.Testing sensors：Using high-precision load sensors, multi head clamps can be selected

10.test fixture：High temperature tensile test fixtures, high temperature bending test fixtures, etc. can be customized

11.power system：Maintenance free servo drive system, precise control

12.High temperature deformation measuring device：FLProfessional high-temperature creep deformation measurement system

13.Creep testing software：inFLHigh temperature creep endurance testing machine for plastic fiber composite materialsOn the testing software, the testing status of the machines in the system can be observed: whether the machines have been tested; The main parameters of the machine being tested (test temperature, test force, test time, creep deformation, stress relaxation); Entering the test interface of the machine, you can see the detailed information of the machine's test, including unit information, sample information, test temperature, test force, test plan, creep deformation and other detailed information.