Clean type pressure reducing valve

Clean pressure reducing valve $r $n $r $nSV208 $r $n $r $n Sanitary grade valve/High cleanliness medium $r $n $r $n is mainly used in high-purity pipelines in the biopharmaceutical and food industries, such as SIP processes for pipelines and tanks, sterilization cabinets, clean compressed air, etc.

Clean type pressure reducing valve

SV208

Sanitary valves/high cleanliness media

Mainly used in high-purity pipelines in the biopharmaceutical and food industries, such as SIP processes for pipelines and tanks, sterilization cabinets, clean compressed air, etc.

► Product features

The valve material is made of forged stainless steel that meets EN10204 3.1 certification. Through electrolytic polishing, it can achieve higher standards of clean use. The sealing rubber gasket that comes into close contact with the medium complies with FDA certification in the United States.

Pure mechanical structure, not prone to malfunctions and easy to maintain, with low equipment maintenance costs. Corner seat structure design, vertically installed, can achieve 'self emptying' under the action of gravity, and there is no residue or liquid accumulation inside the valve.

► Standard configuration

Main material: SS316L Surface treatment: EP<0.4 | jm

Connecting party: ASMEBPE1

Medium: Steam

Maximum withstand voltage: lO. OBar Maximum temperature resistance: 160..

Pressure range behind the valve: 1.0Bar to 4.0Bar

► Optional configuration

Connection method: DIN/ISO customized interface, maximum temperature resistance: 180 ℃

Medium: Compressed air/water/other fluid. Adjustable pressure after valve: 0.4-6Bar. Installation size: customizable

PAGE 01 02

► Common operating condition flow data reference, recommended safety factor 1.3

► Schematic diagram of the main structure of the valve:

01 Valve body

02 Spring cover

03- Dust bolt

04- Adjusting screw

05-- Spring

06-- Spring Base

07- Sealing gasket

08- Export pipeline

09- Valve core

10—Bearing cover plate

11—bearing

12—Axial connection

13—inlet pipe

Installation dimension diagram:

Installation location diagram:

*To ensure a clean application, vertical installation is required

Please be sure to follow the installation and use instructions of the Seefert pressure reducing valve

PAGE 03 04

►Clean type pressure reducing valveSV208 selection table:

*For special models, please inquire

Clean type drain valve

ST116

Sanitary valves/high cleanliness media

Mainly used in the drainage of high-purity pipelines, various steam branch pipelines, and heat tracing pipelines in the biopharmaceutical and food industries.

► Product features

The valve material is made of forged stainless steel that meets EN10204 3.1 certification. Through electrolytic polishing, it can achieve higher standards of clean use. The sealing rubber gasket that comes into close contact with the medium complies with FDA certification in the United States.

Compact structure, easy installation, and can be freely disassembled for easy cleaning and maintenance.

Mature box film technology, precise and sensitive control switch drainage.

Multiple options for subcooling and selecting the appropriate subcooling can effectively improve steam utilization efficiency.

”The characteristic of "always on failure" ensures that there is no residual condensed water in the steam pipeline, effectively preventing the emergence of bacteria.

► Standard configuration

Main material: SS316L Surface treatment: MP<0.6nm

Connecting party: ASMEBPE 1/4 inch, 1/2 inch, 3/4 inch; 1-inch medium: steam

Maximum withstand voltage: 6.0Bar Maximum temperature resistance: 165 ° C

Subcoling: 6 ° C

>Optional configuration

Connection method: DIN/ISO/welding and other customized interfaces

Maximum withstand voltage: lO. OBar Maximum temperature resistance: 180 ° C

Medium: Steam

Subcoling: 15 ° C/25 ° C

Installation size: customized