-
E-mail
m17351886899_1@163.com
-
Phone
17351886899
-
Address
No. 286 Tongtai Avenue, Jinhu County Economic Development Zone, Huai'an City, Jiangsu Province
Jiangsu Qixing Instrument Co., Ltd
m17351886899_1@163.com
17351886899
No. 286 Tongtai Avenue, Jinhu County Economic Development Zone, Huai'an City, Jiangsu Province
Product Description:
Clamp type quick installation metal tube float flowmeterAlso known as sanitary metal tube float flowmeter, it adopts the principle of variable area measurement and can measure and control the flow of various fluids. This series of flow meters mainly consists of a connection type quick release chuck, a measuring tube body, a conical float, and an indicator. Due to the use of different indicators, it can achieve on-site pointer indication, (4-20) mA analog signal output, LCD display of instantaneous and cumulative flow, upper and lower limit alarms, HART protocol communication, battery power supply, and explosion-proof functions. The clamp type quick installation metal tube float flowmeter is widely used in the flow measurement and automatic control of liquids in industries such as food and chemical, petroleum, metallurgy, power, environmental protection, medicine, and light industry.
1、 Technical parameters
Measurement range: Water (20 ℃) 60~55000L/h Refer to flow chart
Range ratio: Standard 1:10
Accuracy: Level 1.5
Pressure rating: DN25~DN100 PN0.6
Special types should be negotiated with the factory before selection and ordering
Installation form: Vertical installation with medium bottom in and top out
Pressure loss: 7kPa-70kPa
Medium temperature: Standard type: -80 ℃~+200 ℃
Medium viscosity: DN25: < 250mPa. s
DN50~DN100: <300mPa. s
Environmental temperature: LCD type -30 ℃~+55 ℃
Pointer type: -40 ℃~+120 ℃
Connection type: quick installation chuck
Cable interface: M20 × 1.5
Power supply: Standard 24VDC two-wire system 4-20mA (10.8VDC~36VDC)
Communication type: 85~265VAC 50HZ
Battery type: 3.6V@4AH Nickel-metal hydride battery
Alarm output: upper or lower limit instantaneous flow alarm
Standard type: open collector output (maximum) 100mA@30VDC Internal impedance of 100 ohms
Special type: Relay output (maximum contact capacity) 5A@250VAC )
Pulse output: Accumulated pulse output, minimum interval of 50 milliseconds
LCD display: instantaneous flow display value range: 0~50000
Accumulated traffic display value range: 0~
Protection level: IP65
Explosion proof mark: intrinsically safe type ia Ⅱ CT6 explosion-proof type d Ⅱ BT4
2、 Sanitary typeClamp type metal tube float flowmeterFlow Range Table
| Sanitary clamp type path DN(mm) |
flow range |
Clamp size |
Supporting pipeline size |
Water (20 ℃) L/h |
Φ(mm) |
Φ(mm) |
|
25 |
60~600 |
50.5 |
48 |
100~1000 | |||
160~1600 | |||
250~2500 | |||
32 |
160~1600 |
50.5 |
48 |
250~2500 | |||
400~4000 | |||
550~5500 | |||
40 |
250~2500 |
50.5 |
48 |
400~4000 | |||
550~5500 | |||
50 |
400~4000 |
64 |
57 |
600~6000 | |||
1000~10000 | |||
65 |
1000~10000 |
91 |
76 |
1600~16000 | |||
2500~25000 | |||
80 |
1600~16000 |
106 |
89 |
2500~25000 | |||
3500~35000 | |||
100 |
4000~40000 |
119 |
108 |
5500~55000 |