Chlorine dioxide dosing device, welcome to purchase

Chlorine dioxide dosing device, welcome to purchase

Chlorine dioxide dosing device, welcome to purchase

Yongxing Environmental Protection Equipment Co., Ltd. in Weifang City, Shandong Province is a high-tech enterprise specializing in the research and production of water treatment environmental protection equipment. And long-term cooperation with multiple scientific research and design units. We have accumulated rich experience in the design, manufacturing, installation, commissioning and other technical aspects of environmental protection equipment

1、 Chlorine dioxide productionProduct characteristics, main applications, and scope of use
1.Chlorine dioxideThe water disinfectant generator is from WeifangYongxingThe technology product researched and produced by Environmental Protection Water Treatment Equipment Co., Ltd. adopts a chemical process toSodium chlorateandhydrochloric acidPreparation of chlorine dioxide andCL₂The mixed disinfectant can be widely used for disinfecting drinking water, swimming pools, and hospital wastewater; Industrial circulating cooling water for sterilization and algae removal; Industrial wastewater decolorization, deodorization, or removal of reducing pollutants.
2. Composition and representative significance of specifications and models
The specifications of the generator are divided according to the effective chlorine production per hour (g/h) of the equipment, for example:YX-500 g/h refers to a maximum effective chlorine production rate of 500 grams per hour for the product.
3. Operating environment and working conditions
Location: Indoor (well ventilated)
Water source matching: pipe diameter and corresponding water injector matching; Water pressure: 0.2-0.3MPa
Power supply: AC 220V, 380V, 50HZ

2、 Structural features and working principle
（1） Overall structure and working principle
Overall structure: The generator consists of a feeding system, a reaction system, a control system, and a safety systemThe generator casing is made of PVC material.
Working principle: It is operated by a metering pumpSodium chlorateWater solution andhydrochloric acidThe solution is input into the reactor and undergoes a thorough reaction at a certain temperature and negative pressure, producing mainly chlorine dioxideCL₂The auxiliary disinfectant gas is absorbed by the water sprayer and fully mixed with water to form a disinfectant solution, which is then introduced into the disinfected water.
（2） Main component functions and working principles
(1) Water jet injector: A water jet injector is a type of air extraction component designed based on the principle of jet flow. When power water passes through the water jet injector, negative pressure is generated inside, and external gas is sucked into the water jet injector under the pressure difference, thereby achieving suction. InhaledCLO₂Gas is mixed to form disinfectant, and water jets are also used for absorption in raw material tanks.
(2)metering pumpTransporting raw materials and regulating flow rate.
(3) Reflector aeration port : an air channel for equipment operation. During installation, it can be connected to a pipeline and open to the outside, while maintaining communication with the atmosphere.
(4) Electric contact pressure gauge: An electric contact pressure gauge is one of the devices that protect the safe operation of equipment. Its working principle is that when the water pressure at the front end of the water injector is lower than the set value, the gauge controls the metering pump to stop feeding.
(5) Raw material level sensor: The raw material level sensor is also one of the devices that protect the safe operation of equipment. It is installed at the bottom of two raw material tanks. When any one of the raw materials is used up, the metering pump will stop feeding.
(6) Temperature controller: The temperature controller is the heating control mechanism of the system, which ensures the optimal chemical reaction temperature between sodium chlorate and hydrochloric acid.
(7) Controller: The controller isChlorine dioxide generatorThe control core completes the entire automatic control of the system.

3、 Equipment operating conditions
1. Power supply: AC220V 50HZ
2. The dosing method is continuous or intermittent, and the dosing time and frequency vary depending on the season and water quality.
3. The dosing power water is industrial water or tap water.
4. Quality of chemical drugs used
Hydrochloric acid: It should comply with the first grade standard of GB320-93 "Synthetic Hydrochloric Acid for Industrial Use" and be a liquid with a concentration of 30%.
Sodium chlorate: Industrial sodium chlorate is a solid with a purity of 99% or a liquid with a concentration of 30%.
4、 Equipment manufacturing characteristics
1. Chlorine dioxide generatorIt is an automatic controlled vacuum dosing system that operates safely and reliably.
2. The conversion rate of sodium chlorate in the system is above 85%.
3. The control system adopts microcomputer control, which can achieve automatic temperature control, material shortage, undervoltage, and protection functions.
4. The equipment layout process is reasonable, and the layout of pipelines, fittings, valves and other accessories is beautiful and generous. All components are assembled and fixed in our company to ensure that they are not lost or damaged during transportation.
All structures and materials within the framework can meet the anti-corrosion requirements of the local environment, and high-quality products are selected based on this.
5、 Equipment installation conditions
1. The equipment should be installed indoors, and the working environment temperature should be above 15 ℃.
2. Chlorine dioxide has strong corrosiveness, therefore, it should be avoided to place it in the same room as other equipment during equipment installation.
3. The equipment room should be paved with cement flooring and have a flushing water source and drainage system.
4. A ventilation fan should be installed in the disinfection room to maintain good ventilation.
5. There should be a pressure water source between the equipment, with a pressure of 0.2-0.4 MPa.
6. There should be necessary lighting facilities and a 220V, 5A-10A single-phase three hole power socket between the devices.