Chemical plant chloride ion analyzer

Instrument Introduction

Shanghai Xuantian CT-7600 modelChemical plant chloride ion analyzerIt is an automated device based on the electrochemical principle of ion selective electrode ISE, which can monitor the concentration of chloride ions in water in real time and continuously. It is widely used in industrial process control, environmental emission monitoring, and water quality safety assurance.

Technical Features

Integrated temperature sensor and measurement reference electrode, single electrode can complete measurement;

It has the characteristic of fast response speed,Chemical plant chloride ion analyzerMeasurement time less than 30 seconds;

Built in large capacity storage chip, realizing historical data storage function, convenient for users to trace back;

Support automatic calibration of standard solutions or on-site solutions, suitable for real-time continuous online monitoring;

Equipped with 4-20mA current output and RS-485 digital communication function, it is easy to connect to automation control systems.

Typical application scenarios

1. Chlor alkali industry

Salt water refining monitoring: Monitor the Cl ⁻ concentration (300-315g/L) of the feed salt water to the electrolytic cell to ensure electrolysis efficiency.

Diluted salt water recovery: Monitor Cl ⁻ residue to prevent equipment corrosion and hydrogen leakage risks.

2. Petrochemical industry

Crude oil desalination: Monitor chloride ions to prevent HCl from corroding distillation equipment (such as pressure reducing towers).

Air separation unit: monitoring of chloride ions in turbine condensate to prevent equipment corrosion.

3. Chemical production process control

Synthesis of chlorinated organic compounds: Monitor the concentration of chloride ions in the reaction system to ensure product purity.

Wastewater treatment: Real time tracking of Cl ⁻ concentration in each unit of pre-treatment and deep treatment, precise control of chemical dosage.

technical indicators

Product model: CT-7600

Measurement range: 0-35000mg/L

Display mode: LCD backlit display, resistant to temperature up to 80 ℃ without turning black

Accuracy: ± 5% FS

Resolution: 0.01mg/L

Pressure range: ≤ 0.2Mpa

Temperature range: 0-80 ℃

Shell material: plastic shell

Relays: 3 sets of relays

Current output: 4-20mA current output

Digital output: RS-485 digital communication

Calibration methods: standard solution calibration, on-site calibration

Cable: standard 8m (extendable)

Power supply: AC220V/DC24V

Installation method: Immersion/Flow/Pipeline

Protection level: IP68 waterproof