Chemical diaphragm pump ME 2 NTOverview:

A single-stage diaphragm pump is a solution for continuously and oil-free extraction of gas or steam, used in applications that do not require high vacuum levels. In daily use, compared to water jet pumps, they do not require water resources and therefore do not produce any wastewater. Mainly used in vacuum ovens with medium air load, single or multiple suction filtration. Usually, this device is very suitable for gas extraction and oil-free exhaust. The single-stage structure enables the pump to have the advantages of both high pumping speed and reaching a maximum vacuum of 70mbar.

Performance characteristics:

• 1. Quiet exhaust and extremely low vibration
• 2. There is still a strong suction force when performing multiple operations
• 3. Can maintain good performance even at low vacuum values
• 4. Low vibration
• 5. Ultra long membrane lifespan, maintenance free drive system, low overall maintenance cost

Chemical diaphragm pump ME 2 NTTechnical indicators:

• technical indicators	unit	ME 2 NT
  Number of pump heads/stages		1 / 1
  High pumping speed at 50/60 Hz	m3/h	2.0 / 2.2
  High pumping speed at 50/60 Hz	cfm	1.2 / 1.3
  Extreme vacuum (absolute pressure)	mbar/torr	70 / 52
  Environmental temperature range (operation)	°C	10 - 40
  Environmental temperature range (storage)	°C	-10 - 60
  High outlet pressure (absolute pressure)	bar	2
  Air inlet interface		Hose nozzle joint DN 8-10 mm
  Air outlet interface		Silencer/G1/4 '
  Rated motor power	kW	0.18
  Rated speed at 50/60 Hz	min-1	1500/1800
  Protection level		IP 40
  Dimensions (length x width x height)	mm	243 x 211 x 198
  weight	kg	10.2
  Noise level at 50 Hz, typical value	dBA	45
  NRTL standard		Canada and the United States
  ATEX certification (230V only)		II 3G IIC T3 X Internal Atm. only
  Product configuration		After the installation of the pump body is completed, it can be connected and used. The instruction manual is attached
  Optional accessories		VACUU·LAN ® Mini Network (2614455) Vacuum regulating valve with vacuum gauge (696840) Vacuum rubber tube DN 8 mm (686001)

ME 2 NT - Dimensional Specification Table