Characteristics and functions of ODE two position two-way solenoid valve

NegotiableUpdate on 05/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The characteristics and functions of ODE two position two-way solenoid valve. Therefore, if the inlet pressure when the valve is opened is higher than 1 bar, it is not recommended to use a valve with a free outlet, which means that there is no outlet restriction and the pressure drops to 1 bar. In addition, special attention must be paid to issues when designing hydraulic circuits

Product Details

Characteristics and functions of ODE two position two-way solenoid valve

When opening or closing due to an imbalance in pressure, it causes opening or closing

Mainly through diaphragms or pistons.

The normally open two-way solenoid valve is a diaphragm type pilot controlled solenoid valve with a minimum working pressure of 0.2 bar,

Applicable media include air, water, inert gases, etc. When the power is cut off, the valve opens,

After being powered on, it closes under the action of magnetic force.

Multiple voltage options include AC220V, AC110V, AC24V, DC110V, DC24V, etc. Compact in appearance and long in service life.

21WA3Z0E130 21WA4Z0E130 sealing membrane is made of EPDM (ethylene propylene rubber)

For beverage distribution, there is an upper body with an inlet tube and a lower body with an inlet tube and an outlet tube.

Cover: This is found in some solenoid valves, which usually have pilot control valves and covers

It usually accommodates guide holes.

Pipeline: A mechanical component pipeline used to connect solenoid valves to inlet, outlet, and exhaust.

Orifice: This is a perforated component that is opened or closed by a shutter, allowing or preventing

The passage of fluids. It can be machining or insertion. Main hole

A solenoid valve is an electromagnetic valve that allows the maximum flow rate of the valve itself, and the pilot hole,

Temperature resistance range -10 ℃~140 ℃ Applicable media: water, low-pressure steam, etc.

Diaphragm: a mixed action component or solenoid valve with pilot control that opens or closes

Close the main orifice due to the effect of different pressures on its surface.

Complete diaphragm: This is a component that is assembled onto the diaphragm, such as diaphragm bearings, rivets, etc.

Piston: a component with mixed action or an electromagnetic valve with pilot control for opening or closing

The main hole is affected by different pressures on its surface.

The complete piston is a component that is assembled into the piston, such as rivets, shutter, etc

Valve body: The central part of an electromagnetic valve. Pipelines are typically located on the main body and main orifice,

It's inside. In some cases, the body is divided into two parts: for example, in an electromagnetic valve

Characteristics and functions of ODE two position two-way solenoid valve