Chain type new three row corn planter

This model of corn planter has seven types of rows ranging from two to eight, and the configuration can be assembled according to needs. The accessories are as follows:

1. Trench opener: can be matched with solid, hollow trenchers, and rear corner trenchers are divided into pointed shovel and elliptical trenchers,

2. Fertilizer box: It can be equipped with V-shaped, flat bottomed, perforated, transparent plastic steel, large compartment, small compartment, double compartment, three-layer compartment, and can be driven by a motor according to demand,

3. Seed planter: It can be matched with finger clip or spoon wheel seeders as needed, as well as Tianjiang conveyor belt seeders

4. Large beam frame: divided into six different angles, it can be assembled with large tractors, medium tractors, and small tractors,

1. The working condition of the chain transmission is clear at a glance, and faults can be detected and dealt with in a timely manner. Even if the ground wheel chain of the three row corn planter falls off, it will not affect the sowing operation,
2.The corn seeder uses a spoon wheel type planter, and adjusting the size of the seeds is done by pulling out the yellow adjustment handle on the right. When adjusting upwards, small corn seeds are sown, and when adjusting downwards, large corn seeds are sown. The center of this planter can also rotate to adjust the gap between the spoon wheel and the partition of the corn seeder.

The installation pin for the tractor suspension has two parts, one large and one small, which can meet the needs of various types of tractors. The connection point is fixed with two screws and can be adjusted left and right,
2. The base of the trencher is a protective plate, firmly fixing the solid trencher inside, and the trencher will not roll or deform.

1. The large fertilizer box can sow 70 kilograms of fertilizer per acre, which is wear-resistant, weather resistant, and can be adjusted smoothly. The bottom of the fertilizer box is also arc-shaped, allowing the fertilizer to be concentrated in the center of the box without leaving any residue
2. The chain support can be adjusted up and down, back and forth, and the fertilizer box can be fixed without being deformed by the tension of the chain.

The front corner is also slightly curved downwards in a pointed shovel style, which eliminates the need for people to stand on top of the corn planter when sowing hard land or field heads,

The bottom iron plate height of the front and rear corner trenchers is 20cm. After entering the soil, the soil will not affect the stainless steel rollers. When the stainless steel rollers encounter firewood, they will be thrown aside, which does not affect the normal operation of the corn seeder. The iron plate at the bottom of the old corn seeder trencher is too low, and the soil will cover the lower end of the stainless steel rollers after entering the soil, causing them to be unable to rotate and unable to function properly.

The widened ground wheel can cover more soil on the corn seeds and fertilizers, so when sowing corn, there is no need to worry about planting too shallow and exposing the corn seeds or adjusting too deep for the tractor to pull.

Chain type 2BYCF-3-row corn fertilizing and sowing machineIt is mainly used for precision sowing of corn and soybeans. The corn no tillage fertilization precision sowing machine is used in conjunction with wheeled tractors and is widely applicable in plain and hilly areas. It can sow corn and soybeans after iron stubble or land preparation, and can also fertilize simultaneously, truly achieving multi-purpose use of one machine. The machine has a reasonable design structure, easy operation, flexible maneuverability, and is suitable for small-scale operations. This function can complete trenching, fertilization, sowing, soil covering, and compaction in one go Waiting for multiple assignments. The corn planter has the characteristics of uniform sowing, consistent depth, stable row spacing, good soil cover, seed saving, and high work efficiency

Chain type 2BYCF-3-row corn fertilizing and sowing machinePrecautions for use:

1. Before entering the field, maintenance should be carried out by cleaning the debris in the sowing box and the tangled grass and soil on the trencher to ensure good condition. Lubricating oil should be added to the various transmission and rotating parts of the tractor and seeder according to the instructions, especially paying attention to the lubrication and tension of the transmission chain and the tightening of the bolts on the seeder before each operation.

The rack cannot be tilted. After the seeder is attached to the tractor, it should not be tilted. When working, the rack should be in a horizontal position in front and behind.

Make various adjustments according to the instructions in the user manual and agricultural requirements, including seeding rate, spacing of trenchers, and soil cover for trenching Adjust the depth of the pressure wheel appropriately.

Pay attention to adding seeds to the seed box to ensure that there are no small, rotten, or miscellaneous seeds, in order to ensure the effectiveness of the seeds; Secondly, the amount of seeds added to the seed box should be at least enough to cover the entrance of the seeding box to ensure smooth seeding.

2. Trial sowing: To ensure the quality of sowing, it is necessary to persist in a trial sowing of 20 meters and observe the working condition of the sowing machine before conducting large-scale sowing. Please have agricultural technicians and local farmers conduct testing and consultation to confirm compliance with local agricultural requirements before proceeding with large-scale sowing.

3. Pay attention to driving at a constant speed in a straight line: When selecting the walking route for the agricultural machinery, it should be ensured that the seeding and mechanical entry and exit are convenient. When sowing, pay attention to driving at a constant speed in a straight line, and do not rush or stop halfway to avoid re sowing or missed sowing; To prevent clogging of the trencher, the lifting and lowering of the seeder should be operated while in motion, and the seeder should be lifted when reversing or turning. First, broadcast the ground horizontally to avoid hardening the ground and causing the broadcast depth to be too shallow.

Regularly observe

4. During sowing, regularly observe the working conditions of the seeder, trencher, covering device, and transmission mechanism. If there are blockages, clay, tangled grass, or loose seed coverage, they should be promptly eliminated. Adjustment, repair, lubrication, or cleaning of tangled grass must be done after parking to protect the machinery. When the seeder is in operation, it is strictly prohibited to reverse or make sharp turns. The lifting or lowering of the seeder should be done slowly to avoid damaging the machinery.