Ceramic humidity sensing flue gas humidity analyzer

Ceramic humidity sensing flue gas humidity analyzer

Technical features:

. Measuring principle：Dry wet oxygen principle(Ceramic moisture sensing)

. test scope: 0 ~ 40%VOL H2O(Optional)0 ~ 25.00%VOL O2）

. measurement accuracy: ≤±2%FS

. heavy again sex: ≤±1%

. response time：T90 ≤30S

. analog output:4-20mA. DC(Non isolated output, load resistance less than)500Ohm)

. working power supply:24V. DC

. sample gas temperature: 0 ~ 170℃

. sampling method:Through type

. pneumatic connection: NPT 1/4internal thread

. Sample gas components:No flammable gases, no highly corrosive gases, and less than dust content1mg/Nm3

. Specifications and Dimensions:52mm×156mm×150mm（H×W×D）(Transmission section

. service life: ＞24Month (under normal usage conditions)

. Installation method:wall-mounted

Instrument features:

. High precision temperature automatic compensation system to eliminate the influence of environmental temperature;

. High precision pressure compensation function makes humidity measurement more accurate;

. Users can freely set4-20mAEnable users to achieve higher precisionSimulated output of degree;

. Split design, built-inPIDHeat tracing function, Facilitating installation and increasing the lifespan and long-term stability of the analyzer;

. Easy to operate, long service life, and easy to maintain.

Ceramic humidity sensing flue gas humidity analyzer

Application scenarios:

Widely used for measuring and analyzing the water vapor content of flue gas before and after desulfurization and denitrification in power plants, chemical plants, and steel plants.

Ordering Instructions(Please specify when placing an order)

. Analog output corresponding to measurement range

. Do you want to order a display module