Ceramic bulk density tester

Precision Ceramic Bulk Density Tester



Can measure the density of ceramic blanks and the density after sintering

Applicable to:Precision ceramic workerline of businessNew materialsstudystudy carefullyoneposition
According to the criteria; According to GB/T2413, 1966, 2834, ASTM C20/C134/C373/C329, EN-725, it can be applied toboiling methodVacuum saturation method, wax sealing method for measurement
According to Archimedes and the principle of buoyancy, quickly read measurement values.

Three density measurement modes:
Mode 1: For non absorbent ceramic products, the specific gravity and volume of the product can be directly read
Mode 2: For ceramic products with water absorption, bulk density, wet density, apparent porosity, water absorption rate, open pore volume, sealed pore volume, and total porosity can be directly read.
Mode 3: The wax sealing method can directly read the bulk density;
Mode 4: For ceramic products with water absorption, the water absorption rate of the ceramic material can be directly read.



Specification: (Both of the following can be measured for product density using silicone oil method. If mercury method is required, please contact the supplier)

Functional characteristics and devices:
·Gold plated ceramic capacitive sensor;
·Electronic balance combined with density testing device can achieve density testing of liquids and solids;
·Can be used in conjunction with a constant temperature water bath to measure the specific gravity of liquids at the required temperature;
·Density direct reading reduces tedious calculations;
·Standard RS232 data output function, easy to connect to PC and printer.;
·Fully automatic zero point tracking, buzzer alarm, overload alarm function
·External dimensions, 270 * 270 * 270; Weight; 6.5KG
·Integrated sink size, 165 * 115 * 85
·Blue backlit LCD display;

This machine adopts an integrated injection molding measuring frame and an integrated injection molding transparent water tank, which is easy to assemble, wear-resistant, drop resistant, corrosion-resistant, and can clearly observe the condition of the sample in the medium.



Density measurement steps for water absorbing ceramic materials：
① Place the sample on the measuring table, measure the weight in the air, and press the M key to memorize.
② After saturating the sample, place it on the measuring table, measure the weight in the air, and press the M key to memorize.
③ After saturating the sample, place it in water, measure the weight in the water, press the M key to memorize, and directly display the density value.
Press 0 to switch between displaying wet density, apparent porosity, water absorption, open pore volume, closed pore volume, and total porosity.

Measurement steps for non absorbent materials:
① Place the sample on the measuring table, measure the weight in the air, and press the M key to memorize.
② Immerse the sample completely in water, measure the weight in water, press the M key to memorize, and directly display the density value.

Measurement steps for density of porous materials using wax sealing method:
① Place the sample on the measuring table, measure the weight in the air, and press the M key to memorize.
② Place the sample in the wax oven and seal it with wax before placing it on the measuring table. Measure the weight in the air and press the M key to memorize.
③ Put the sealed wax sample into water, measure the weight in the water, press the M key to remember, and directly display the density value. Press 0 to switch the display volume.