Cement flexural and compressive testing machine

DYE-300 30 ton hydraulic cement pressure testing machine

Used for flexural strength testing of concrete specimens and compressive strength testing of building materials such as cement, mortar, and red bricks.

Main technical parameters:

Maximum load capacity: 300KN

Testing machine level:Level 1

Compressed space:210mm

Piston stroke:80mm

Upper pressure plate size: diameter170mm

Lower pressure plate size: diameter170mm

Host dimensions:800x400x1350mm

Whole machine power:0.75kw

Total weight of the machine400kg

DYE-300B 30 ton Micro Electro Hydraulic Servo Cement Pressure Testing Machine

Used for flexural strength testing of concrete specimens and compressive strength testing of building materials such as cement, mortar, and red bricks.

Main technical parameters:

Maximum load capacity: 300KN

Testing machine level:Level 1

Compressed space:180mm

Piston stroke:60mm

Fixed upper pressure plate size: diameter108mm

Ball head type lower pressure plate size: diameter170mm

Lower pressure plate size: diameter205mm

Host dimensions:1200x500x1370mm

Whole machine power:0.75kw

Total weight of the machine510kg

DYE-300A 30 ton microelectromechanical hydraulic servo cement flexural and compressive integrated machine

Cement flexural and compressive testing machineUsed for flexural strength testing of concrete specimens and compressive strength testing of building materials such as cement, mortar, and red bricks.

Cement flexural and compressive testing machineMain technical parameters:

Maximum load capacity: 300KN

Testing machine level:Level 1

Compressed space:180mm

Piston stroke:60mm

Fixed upper pressure plate size: diameter108mm

Ball head type lower pressure plate size: diameter170mm

Lower pressure plate size: diameter205mm

Host dimensions:1150x500x1400mm

Whole machine power:0.75kw

Total weight of the machine500kg

ZBSX-92A Shock Strike Standard Shaking Instrument

Composed of swing mechanism, shock mechanism, clamping mechanism, and other components. The electric motor rotates the main eccentric shaft on the worm gear supporting swing frame by rotating the shaft, which in turn drives the other two supporting eccentric shafts to rotate, promoting the swing radius of the entire screen group, which is also equal to the plane circumference swing of the eccentricity. At the same time, another pair of worm gears are driven by the same electric motor through a cam, and the top rod is equipped with a swing frame of a screen group, which periodically lifts and falls onto the anvil of the machine base by its own weight, causing the swing frame to oscillate in a flat circular motion while undergoing vibration.

Technical Specifications

1. Sieve diameter: 300mm

2. Screen seat vibration amplitude: 8mm

3. Strike frequency: 147 times/minute

4. Screen shaking frequency: 221 times/minute

5. Turning radius: 12.5mm

6. Motor power: 0.75KW

7. Voltage 380V

HJ-84 concrete accelerated curing box

Predict through different accelerated maintenance methodsThe compressive and flexural strength of concrete during the 7-day and 28 day curing periods are equipment for quality control of concrete.

Main technical parameters:

Box size:810X580X400mm

Power supply voltage380V 50HZ

Electric heating power: single group3KW in total, 3x3KW

Temperature control range:10℃-100℃

Water storage capacity:125kg

Test modulus:6 sets of 100 triple trial models and 3 sets of 150 trial models.

SY-84 cement rapid curing box

Suitable for rapid constant temperature curing methods of ordinary cement, Portland cement, slag cement, volcanic cement, fly ash cement, etc. in cement plant construction and scientific research units. It can be used inPredict the compressive and flexural test results for 3-day, 7-day, and 23 day periods within 34 hours (users can determine the predicted number of days based on specific circumstances) to shorten the cement inspection cycle and accelerate the cement delivery time.

Main technical parameters;

Temperature control range:10-100℃

Time control range:0.5-24 hours

Electric heating tube parameters:1000W/220V

The amount of hot water is approximatelyHeating up to 100 ℃ in 12 hours is equivalent to 2 hours

The power consumption for one quick test is about20 degrees

Working size inside the box: (can hold three sets of test molds)550x305x260mm

SHBY-40B Concrete Standard Curing Box

According to the countryGB1345-99 "Testing Method for Cement Standard Consistency, Water Consumption, Setting Time and Stability" and technical data provided by the National Building Materials Research Institute and relevant departments are developed, designed and manufactured for use in large, medium and small cement plants, construction and engineering departments for the setting and curing of concrete and cement specimens.

Main technical parameters:

1. Humidity control temperature: RH95% or above

2. Control temperature: 20 ℃± 1 ℃

3. Power supply voltage: 220V/50HZ

4. Heating power: 500W

5. Cooling power: 145W

6. Humidification power: 45W

7. Moisturizing capacity: 400 milliliters per hour

8. Humidifier capacity: 5.5L

9. Box space:

40B typesingle doorcan be placed15 sets (45 pieces) of 150 ³ concrete test blocksHeating tube power500W）

Exterior dimensions (length)Width x Height: 1020 x 630 x 1460mm

Inner container size (length)Width x Height: 600 x 500 x 1200mm

SHBY-40B Concrete Standard Curing Box

According to the countryGB1345-99 "Testing Method for Cement Standard Consistency, Water Consumption, Setting Time and Stability" and technical data provided by the National Building Materials Research Institute and relevant departments are developed, designed and manufactured for use in large, medium and small cement plants, construction and engineering departments for the setting and curing of concrete and cement specimens.

Main technical parameters:

1. Humidity control temperature: RH95% or above

2. Control temperature: 20 ℃± 1 ℃

3. Power supply voltage: 220V/50HZ

4. Heating power: 800W

5. Cooling power: 145W

6. Humidification power: 45W

7. Moisturizing capacity: 400 milliliters per hour

8. Humidifier capacity: 5.5L

9. Box space:

40B typeOpen the door up and downcan be placed20 sets (60 pieces) of 150 ³ concrete test blocksHeating tube power800W）

Exterior dimensions (length)Width x Height: 1120 x 630 x 1550mm

Inner container size (length)Width x Height: 700 x 520 x 1250mm

SHBY-60B Concrete Standard Curing Box

According to the countryGB1345-99 "Testing Method for Cement Standard Consistency, Water Consumption, Setting Time and Stability" and technical data provided by the National Building Materials Research Institute and relevant departments are developed, designed and manufactured for use in large, medium and small cement plants, construction and engineering departments for the setting and curing of concrete and cement specimens.

Main technical parameters:

1. Humidity control temperature: RH95% or above

2. Control temperature: 20 ℃± 1 ℃

3. Power supply voltage: 220V/50HZ

4. Heating power: 1000W

5. Cooling power: 145W

6. Humidification power: 45W

7. Moisturizing capacity: 400 milliliters per hour

8. Humidifier capacity: 5.5L

9. Box space:

60BTwo doors opencan be placed40 sets (120 pieces) of 150 ³ concrete test blocksHeating tube power1000W）

Exterior dimensions (length)Width x Height: 1640 x 620 x 1470 mm

Inner container size (length)Width x Height: 1200 x 500 x 1100mm

SHBY-90B Concrete Standard Curing Box

According to the countryGB1345-99 "Testing Method for Cement Standard Consistency, Water Consumption, Setting Time and Stability" and technical data provided by the National Building Materials Research Institute and relevant departments are developed, designed and manufactured for use in large, medium and small cement plants, construction and engineering departments for the setting and curing of concrete and cement specimens.

Main technical parameters:

1. Humidity control temperature: RH95% or above

2. Control temperature: 20 ℃± 1 ℃

3. Power supply voltage: 220V/50HZ

4. Heating power: 2000W

5. Cooling power: 145W

6. Humidification power: 45W

7. Moisturizing capacity: 400 milliliters per hour

8. Humidifier capacity: 5.5L

9. Box space:

90Bthree-doorcan be placed60 sets (180 pieces) of 150 ³ concrete test blocksHeating tube power2000W）

Exterior dimensions (length)Width x Height: 1980 x 700 x 1460mm

Inner container size (length)Width x Height: 1550 x 630 x 1200mm

BCL-355 Compensatory Concrete Shrinkage and Expansion Rate Tester

Designed according to the standard GB 50119-2003 "Technical Specification for Application of Concrete Admixtures".

The detection instrument is mainly used to determine the longitudinal limit expansion rate and longitudinal limit shrinkage rate of compensating concrete. Used to determine the amount of concrete expansion agent used in the project.

The instrument has the advantages of simple operation and convenient reading.

Technical Specifications

measureQuantity range: 350-360mm

Standard pole length:355±0.02mm

Range of micrometer:0～12.7mm±0.001mm

tryMold specification: 100 * 100 * 400mm

outsideDimensions: 410 * 142 * 120mm

packageInstallation size: 446 * 335 * 160mm

netWeight: 7.45kg

SP-540 concrete shrinkage and expansion meter

comply withThe provisions of GBJ82-85 are instruments used to measure the length (volume) changes of concrete specimens during the hardening process under certain environmental conditions. They can provide reliable support for research institutes, education departments, design and construction units to study, educate, quality control and test the characteristics of concrete.

Technical Specifications

1. Measurement range: 534-545mm
2. Standard rod length: 540 ± 0.2mm
3. Range of dial gauge: 0-10mm, accuracy 0.01mm
4. Dimensions (length x width x height): 655 x 155 x 185mm
5. Weight: 5.3kg

混凝土抗折装置

according toGB/T50081-2002 "Standard for Test Methods of Mechanical Properties of Ordinary Concrete" is made, which is mainly used for the flexural strength test of concrete.

Technical Specifications
1. Diameter range of specimen support and loading head: 20-40
2. Length of specimen support and loading head: not less than b+10 mm
3. Applicable concrete specimens: standard 150 × 150 × 600 (or 550 mm)
4. Non standard: 100 × 100 × 400 mm

Concrete mixture slump conedeterminationceremony

Suitable for slump in1cm-15cm， *Conduct slump tests on plastic concrete with large aggregate particle size not exceeding 40cm. The slump cone is an ideal equipment for teaching, training, and laboratory use, with convenient instrument use and simple maintenance.

Industry standards:

《JG/T 248-2009 Concrete slump tester

structural composition

Composed of slump cone, funnel, ruler, and pestle.

Appearance quality of slump cone

The inner and outer surfaces of the cylinder are flat, smooth, and without any bumps or indentations. The surface of the pounding rod is smooth and the end is circular.

Cement compression fixture

As a national standardA supporting instrument designed for GB/T17671-1999 "Method for Testing the Strength of Cement Mortar (ISO Method)".

Meets the standards of the building materials industryJC/T638-1997 and equivalent use of ISO679:1989 (E) 4.2.8 standard for cement compressive strength testing.

Main technical parameters:

1. The length of the upper and lower pressure plates is 40mm

2. The width of the upper and lower pressure plates is greater than 40mm

3. The free distance between the upper and lower pressure plates is greater than 45mm

4. Gross weight/net weight 5kg

Stone crushing index tester

Used to measure the ability of stone to resist crushing under gradually increasing loadsIt is an indicator for measuring the mechanical properties of stone materials to evaluate their applicability in highway engineering
Main parameters:
Inner diameter of pressure vessel：150mm

Pressure bucket height:125mm

Wall thickness of the test tube:20mm

Pressure head diameter:149mm

Digital display concrete Weber viscosity meter

According to the standards of the People's Republic of ChinaGBJ80-85， Require design and manufacturing. On the basis of complying with standard regulations, electronic timing technology is actively adopted to synchronize with the vibration table and automatically time, thereby eliminating human errors in the past stopwatch timing process and improving the accuracy of measuring the consistency of concrete mixtures. It is a measuring instrument used in the construction industry to control the process of concrete mixing substances.

Main technical parameters:

Slump cone:100±2mm

Bottom inner diameter:100±2mm

tubeHeight: 300 ± 2mm

insideDiameter: 240 ± 5mm

insideHeight: 200 ± 2mm

Vibration frequency:3000 ± 200 times/minute

Vibration table amplitude(with empty container): 0.5 ± 0.10mm

Electric motor power:250 watts

Timing range:0.1-99.9 seconds

Overall dimensions:380×520×870

HG-1000Type digital displayConcrete penetration resistance meter

Use the penetration resistance method to determine the setting time of concrete.

The penetration resistance test is achieved by fixing the sample container with a penetration needle and moving it upwards. The electric motor is driven by a planetary reducerThe speed of 2 revolutions per minute is transmitted to the cam, which drives the roller to rise uniformly. Therefore, the lifting sleeve and the sample container placed on the chassis rise uniformly at the same time, achieving penetration motion.

The resistance is measured using a sealed chamber pressure gauge. When the test sample generates resistance to the penetration needle, this force compresses the oil in the sealing chamber through the force measuring rod, and the increase in oil pressure is indicated by the pressure gauge.

Technical Specifications

Sample container(Upper caliber × Lower caliber × Depth) φ 160mm × φ 150mm × 150mm

*Large penetration force: 1000N

Penetration depth:25mm

Penetration speed:2.5mm/s

Penetration needle cross-section:100 mm 2、 50 mm2 、20 mm2

Penetration position: outer ring9 o'clock, inner circle 4 o'clock

Force measurement method: hydraulic, pressure gauge force measurement

*Small division value: 5N

Indication error:±10N

FBT-9 fully automatic surface area measuring instrument

Automated operation, user-friendly interface, easy to learn; By adopting joint ventures or imported spare parts, the reliability and service life of the product have been greatly improved. The overall design of the product is perfected and the strict manufacturing and testing processes ensure that the product better meets the actual needs of users. At the same time, the high cost-effectiveness of the series of products effectively guarantees the investment interests of users. The flexible product configuration can meet the different needs of different users.

Technical Specifications:

Diameter of the inner cavity of the breathable cylinder:φ12.7+0.05 mm

Height of the sample layer inside the breathable cylinder cavity:(15±0.5)mm

Number of holes in perforated plate:35 of them

Perforated plate aperture:φ1.0 m

Perforated plate thickness:1-0.10 mm

Working voltage of electromagnetic pump:220V；

cycle:50HZ

Electromagnetic pump power consumption:<15VA

Operating voltage of solenoid valve:12V

Instrument weight: approximately6kg

External dimensions:(320 × 100 × 460) mm (width × thickness × height)

HC-7L Concrete Air Content Tester

Use the air pressure method to determine the air content in concrete. There are two ways to measure the gas content by injecting water, and the operation is simple and accurate. The gas content value can be directly read from the dial. The black scale is read for water injection type measurement, and the red scale is read for non water injection type measurement.

construction

1. The measuring bowl is made of special lightweight aluminum alloy, with precision machining on the inner wall. It is lightweight and corrosion-resistant, with a capacity of 7000ml.

2. Upper dial, air chamber, exhaust (water) port, fine adjustment valve, pressure balance valve, hand pump, water injection valve, clamp.

3. Accessories include scraper, tamper, water injector, copper tube, U-shaped tube, and measuring cylinder for testing.

Concrete vibration table

（ Three leakage protectors must be installed at the power cord ）Used for laboratory and on-site testing of specimen forming and pre fabricated components, slabs, columns, beams, and other concrete and mortar components through vibration compaction.

It is mainly composed of a tabletop, a chassis, a vibrator, springs, and other components. The tabletop and chassis are welded together with steel plates and channel steel. The vibration motor consists of an electric motor with an eccentric wheel installed on each side. By lifting four long bolts at the center position of the table (below), it plays a stable and vertical role during the compaction process.

Main technical parameters:
countertop dimensions ： 50 x 50 cm 80 x 80 cm 100 x 100 cm
vibration frequency(Times/Minutes): 2860 2860 2860
amplitude(mm)： 0.3—0.6 0.3—0.6 0.3—0.6
Vibrator power(KW) ： 0.35 1.1 1.1

*Large load (Kg): 65 140 200

power supply voltage： 380V 380V 380V

Weight: 35 kg, 70 kg, 85 kg

40 × 40 × 160mm cement mortar trial mold

national standardUnified equipment specified in GB/T17671-1999 'Method for testing the strength of cement mortar (ISO method).

Technical Specifications:

Cast iron trial mold;

Mold cavity size(Length x Width x Depth): 140 x 40 x 160 mm;

Base appearance*Large size: 245 × 165 × 60 mm;

netWeight: ≈ 6.5k

HP-4.0 concrete impermeability tester

Used for testing the impermeability performance of concrete and determining the impermeability grade. At the same time, it can also be used for measuring the breathability and quality inspection of building materials, and has been widely used by relevant departments such as production, construction, design, and research. The main function is to display the pressure value on the pressure display instrument through sensors, and to automatically increase the pressure according to the set program, complete the test automatically, and reduce the burden on the staff. comply withGB/T50081-2002 (Standard for Test Methods of Mechanical Properties of Ordinary Concrete), T0528-94, GBJ81-85 and other standard requirements.

Main technical parameters

1. High work pressure: 4mpa
2. Working mode: automatic constant voltage (digital display type: automatic constant voltage and automatic boost)
3. Number of test pieces that can be tested at once: 6
4. Geometric dimensions of the trial mold (also known as the main mold): upper diameter of the mold cavity: φ 174.8mm, lower diameter of the mold cavity: φ 185mm
Height: 153mm
5. Piston pump parameters: Flow rate: 0.16L/min
6. Electric motor: power: 120W, power supply: 380V-50HZ
7. Dimensions: 950 × 800 × 950mm
8. Mass: ≈ 220kg

HJW-60 type single horizontal shaft forced concrete mixer

(Please connect three leakage protectors at the power cord)

Suitable for architectural research, construction companies, and concrete component unit laboratories, it can mix ordinary concrete and lightweight concrete, and can also be used in other industry laboratories to mix different materials.

This machine is easy to operate, with high mixing efficiency, small residual amount, and convenient cleaning, making it an ideal laboratory equipment for concrete mixing.

Main technical parameters

1. Feed capacity:Type 1518 litersType 3033 litersType 6066 litersType 100110 liters150 type160 liters200 type220 liters.
2、 出料容量：Type 1515 litersType 3030 litersType 6060 litersType 100100 liters150 type150 liters200 type200 liters.
3. Large discharge capacity:Type 1518 litersType 3033 litersType 6066 litersType 100110 liters150 type160 liters200 type220 liters.

4. Mixing time: ≤ 45 seconds

5. Mixing shaft speed: 48 revolutions per minute
6. Electric motor power: 1.5/5.5/7.5 kW
7. Power supply voltage: 380 V
8. Net weight of product: 110/150/190/400/500 kg

HX-15 mortar mixer (horizontal)

Suitable for architectural research, construction companies, and concrete component unit laboratories, it can mix ordinary concrete and lightweight concrete, and can also be used in other industry laboratories to mix different materials.

Easy to operate, high mixing efficiency, small residual amount, and convenient cleaning, it is an ideal laboratory equipment for mortar mixing.

Main technical parameters

1. Feed capacity: 20 liters.

2. Discharge capacity: 15 liters.
3. Large discharge capacity: 18 liters.

4. Mixing time: ≤ 45 seconds

5. Mixing shaft speed: 48 revolutions per minute

6. Electric motor power: 1.1 kW
7. Power supply voltage: 380 V
8. Net weight of product: 150 kg

Special laboratory testing projects and required instruments and equipment for ready mixed concrete enterprises

Experimental items and parameters

Test items: Inspection of raw materials such as cement, sand and gravel, additives, admixtures, and concrete.

Experimental parameters:

1. Cement: sand strength, sand flowability, water consumption for standard consistency, setting time, stability, fineness, chloride ion content, alkali content.

2. Sand and gravel: particle size distribution, mud content, clay block content, crushing value index, apparent density, bulk density, needle like content, solidity, moisture content, fineness modulus, chloride ion content, harmful substance content, stone powder content.

3. Admixtures: water reduction rate, air content, setting time, compressive strength, chloride ion content, frost resistance, alkali content, pH value, limited expansion rate.

4. Admixtures: loss on ignition, fineness, water demand ratio, moisture content, density, strength, chloride ion content, flowability, sulfur trioxide content, free calcium oxide content, stability, specific surface area.

5. Concrete: slump, air content, setting time, pressure bleeding rate, strength (compressive, flexural), impermeability, frost resistance, chloride ion content.

Instruments and equipment to be equipped

1. Cement constant load pressure testing machine*

2. Cement electric flexural testing machine*

3. Cement sand compaction table*

4. Cement standard curing box*

5. 4 electronic scales * (weighing 50g with a sensitivity of 0.01mg; weighing 100-200g with a sensitivity of 0.1mg; weighing 1000g with a sensitivity of 0.1g; weighing 2000g with a sensitivity of 1g, 1 each)

6. Cement binder flowability tester*

7. Cement slurry mixer*

8. Cement standard consistency and setting time tester*

9. Boiling box*

10. Cement negative pressure sieve analyzer*

11. Breathable ratio surface area meter*

12. Electric heating blower box (0-300 ℃)*

13. Chloride ion content analyzer*

14. Atomic absorption spectrometer*

15. Flame photometer*

16. Sand and gravel vibrating screen machine*

17. Crushing value tester*

18. Pressure testing machine * (Level 2 qualification: no less than 1 pressure testing machine for 300kN, 1000kN, 2000kN, and 3000KN each; Level 3 qualification: At least one pressure testing machine with a capacity of 300kN, 1000kN, and 2000KN each

19. Density meter*

20. Three piece or four piece impeller agitator*

21. Concrete mixer*

22. Concrete vibration table*

23. Gas content analyzer*

24. Concrete penetration resistance tester*

25. Pressure bleeding meter*

26. Concrete impermeability tester*

27. Concrete dynamic elastic modulus tester*

28. Expansion rate measuring instrument*

29. High temperature furnace (0-1000 ℃)*

30. Frost resistance test chamber*

(Above with)*The inspection equipment should provide a purchase invoice

31. Cement specimen curing water tank

32. Supporting trial mold

33. Cement scraper ruler

34. Cement compression fixture

35. Lei's clamp

36. Rayleigh clamp tester

37. Platinum crucible

38. Low temperature electric heating plate

39. Ventilation hood

Dear customer friend: Hello! I am Cangzhou Nanhua Experimental Instrument Co., Ltd., a professional enterprise engaged in the sales of laboratory instruments and equipment. It is located in the west of Cangzhou City, Hebei Province, adjacent to the Bohai Sea to the east, Beijing and Tianjin to the north, as well as the Shihuang and Jingkai expressways,The 106 and 307 national highways pass through my area, making transportation convenient.

We can set up complete sets of instruments and equipment (commercial concrete mixing plant instruments and equipment) for users and friends in the first, second, and third level laboratories.

Quality *, customer first, honest management, and adherence to contracts are our principles.

Welcome friends from all walks of life to visit and guide us. We are dedicated to win-win cooperation with new and old customers at home and abroad, to develop together and create brilliance!

Our company's instruments and equipment (excluding vulnerable parts) are covered by a one-year warranty and are responsible for lifelong maintenance.