Cast iron strip platform

cast ironBar platformInstallation and adjustment:
1. Cast ironBar platformThe installation and fixing method, inCast iron strip platformOn both sides of the inner side, fix it firmly with M8 iron expansion nails or shooting nails at the required spacing (about 500-700mm).Cast iron strip platformThe bottom of the track should be tightly pressed against the ground without any virtual gaps to prevent the cast iron strip platform track from bending and deforming under load.
2. The installation points of the cast iron strip platform include the use of strip bridge plates, level gauges, and other leveling instruments. First, level a cast iron strip platform, and then use this leveled cast iron strip platform as a reference to perform initial adjustment of the cast iron strip platform in sequence downwards, and splice it into a cast beam platform. Then cement grouting is carried out, and after the cement slurry solidifies, the precision adjustment inspection of the cast iron strip platform is carried out.
3. The burial depth of the cast iron strip platform should be equal to or slightly higher than the ground decorative layer by 3-5mm
4. After the installation of the cast iron strip platform, the horizontal deviation within any 1m length should not exceed 1mm, the total length should not exceed 2mm, the horizontal deviation at the corresponding point in the middle of the track should not exceed 1mm, and the parallelism deviation between every two cast iron strip platform tracks should be less than 2mm.

Advantages of cast iron strip platform:
1. Cost saving: This eliminates the need for a large platform, saving material costs and occupying minimal space, making it cost-effective.
2. It can serve as a support.
3. Reducing pressure and shock absorption, the effect is better than the overall platform.
Main uses of cast iron strip platform:
Designed and assembled based on the fixed points of the equipment, mainly used for assembly, testing, welding, and inspection of large equipment.

Main uses of cast iron strip platform:
The cast iron strip platform is designed and assembled into a cast beam platform based on the fixed points of the equipment, mainly used for assembly, testing, welding, and inspection of large equipment. Can be used as a substitute for cast iron foundation platforms.