Cast iron 1-ton weight, flat lock type 1000kg standard weight

Cast iron 1-ton weight, flat lock type 1000kg standard weight

Large weight counterweight measuring weight

————Shanghai Shirun Industrial Co., Ltd

Scope of application: General weighing scales, platform scales, etc.

Material: Cast Iron

Surface treatment: environmentally friendly paint coating

Packaging: Wooden crate or wooden pallet Structure: Lock type

The weights made from pig iron through casting process are relatively inexpensive!

Common specifications include 2000kg, 1000kg, 500kg, 200kg, 100kg, 50kg, 20kg, 10kg, 5kg, 2kg, 1kg.

Common shapes include flat square and lock.

The commonly used grades are M1 and M2.

To maintain the accuracy and reliability of cast iron weights, in addition to following reasonable usage methods during use, it is also necessary to do a good job in maintenance and upkeep of cast iron weights. The correct use of precision cast iron weights such as marble cast iron weights is one of the important conditions for product quality.

After purchasing, it is important to pay more attention to use and maintenance. Due to the characteristics of iron, it is very susceptible to moisture and corrosion. Therefore, when storing, the warehouse should be dry and tidy, and wooden boards should be placed under cast iron weights to prevent moisture. When using, attention should also be paid to avoiding collisions to avoid affecting the accuracy of the weights. When not in use, regular maintenance and oiling are also necessary to prevent the cast iron weights from rusting.

In addition, cast iron weights need to be inspected once a year. If they are used, severely worn, or have doubts about their quality, they should be promptly sent to the metrology institute for inspection. After passing the inspection, they can be put back into use. If they fail the inspection, new weights need to be purchased.

Author: Shanghai Shirun Industrial Co., Ltd

Source: Shanghai Shirun Industrial Co., Ltd

The copyright belongs to the author. For commercial reprints, please contact the author for authorization. For non-commercial reprints, please indicate the source.

Cast iron 1-ton weight, flat lock type 1000kg standard weightMainly used for calibrating electronic scales, such as electronic platform scales, electronic floor scales, electronic hanging scales, electronic forklift scales, electronic truck scales, etc.

Note: The standard for cast iron weights is not packaged in a box. After use, please keep the weights clean, dry, and avoid contact with water. They should be kept in a dry environment

Cast iron weight specifications: 1kg/2kg/5kg/10kg/25kg/50kg/100kg/200kg/500kg/1000kg

Precision of cast iron weights: 50 mg、100mg、250mg、500mg、1000mg、1250mg、2500mg、5000mg、10000mg、25000mg、50000mg

Cast iron weight grades: M1 grade, M2 grade, M3 grade

Cast iron weight shapes: lock type, square, round rolling shape

Protection methods for cast iron weights.

The warehouse where the weights should be placed should be clean, dry, with a certain temperature and humidity.

The second is that when storing weights, wooden boards should be placed at the bottom and covered with cloth or film at the top to prevent direct contact with the ground and moisture and rust.

The third is to do a good job in daily inspection and maintenance, and regularly observe and record Daily maintenance and upkeep are more important than one-time maintenance, to prevent the further spread of rust on the surface of the weights. To wipe the rust, use cotton yarn dipped in engine oil repeatedly until the surface is shiny.

Regularly check the accuracy of the weights, use a higher precision balance to weigh the processed weights, calculate the reduced mass, unscrew the screws on the weights, make up for it with tin wire, and then tighten the screws to prevent the weights from being inaccurate during use.