Cast aluminum meter head on-site temperature display instrument

Cast aluminum meter head on-site temperature display instrument

1、 Instrument Overview:

The on-site temperature display instrument with cast aluminum meter head is produced using imported chips according to international standards, and has the characteristics of high precision, high stability, small error, and low power consumption. It is made of stainless steel shell, which makes the protection more robust and beautiful. The LCD display screen is made of low-power integrated circuits, with clearer display and more convenient reading. It is equipped with a high-capacity battery that can work continuously for more than 5 years. The battery power supply method solves the problem of burying power cables in previous products and has become a highly applicable temperature display instrument in industrial production.

2、 Applicable occasions:

Adopting a stainless steel shell and silicone rubber seal, it has the characteristics of dust prevention, moisture resistance, and vibration resistance, and is suitable for installation and use in various harsh environments. This instrument also has strong explosion-proof performance and is the preferred measuring instrument for industries such as metallurgy, chemical, power, and textile.

3、 Structural material:

1. Shell material: 1C18Ni9Ti;

2. Panel: glass+inner PVC facial mask;

3. Outer tube material: 1C18Ni9Ti.

4、 Performance characteristics:

1. Adopting ultra low power consumption, high precision, and low drift fully imported integrated circuits, the entire machine consumes minimal energy.

2. Has strong anti-interference ability and fast measurement response speed.

3. The aluminum alloy shell and silicone rubber seal have the characteristics of dust and moisture resistance, making them suitable for installation and use in various harsh on-site environments.

4. Suitable for installation in various occasions in conjunction with thermal resistors and thermocouples.

5. Due to the use of battery power, it has super strong explosion-proof performance, especially suitable for places without power supply.

6. Suitable for on-site display of various thermal resistors, thermocouples, or other signal sources.

5、 Technical indicators:

1. Measurement range: -50~600 ℃;

2. Sensor: Pt100;

3. Accuracy: 0.5% ± 1 word;

4. Sampling time: 1-5 seconds;

5. Display: 3-digit LCD;

6. Power supply battery: Equipped with one 3.6V/2.4Ah industrial lithium battery, continuously used for ≥ 3 years;

7. Environmental conditions: Temperature: -20~70 ℃;

8. Humidity: 90% RH;

9. Connection thread: M27 × 2 or customized according to user requirements.

6、 Adjustment method:

1. Rotate the outer ring cover of the dial counterclockwise, open the cover, and gently pry it open with a straight line (only the part below the gasket that contacts the housing can be pred open with a straight line (cannot directly pry open the LCD screen glass to prevent damage to the LCD screen), and gently pry it up in multiple points.

2. After opening, there are "Z" and "S" keys on the back of the LCD screen. If the temperature display deviates from the actual temperature, only the "Z" key can be adjusted slightly, and the "S" key cannot be adjusted casually.

3. The temperature adjustment must have a standard thermometer as a standard, and the thermometer should be placed in a relatively constant temperature environment. After successful adjustment, it should be placed in a relatively constant temperature environment for 8 hours to stabilize. The temperature deviation displayed by each thermometer should be minimized (0.5% of the range value is the normal deviation). The adjustment method is as follows:

a、 If the actual temperature is higher than the displayed temperature, then rotate the "Z" key clockwise for fine adjustment. If the actual temperature is lower than the displayed temperature, then rotate the "Z" key counterclockwise for fine adjustment. Just enough.

b. The "S" key must be adjusted by the manufacturer's technical personnel using a dedicated debugging instrument, and no other personnel are allowed to use this key.

7、 Attention:

1. During storage, installation, use, and transportation, try to avoid collision with the protective tube and prohibit bending or deformation of the protective tube.

2. During installation, it is strictly prohibited to twist the instrument housing.

3. The instrument should operate normally within an ambient temperature range of -30 ℃ to 80 ℃.

4. The temperature at which the instrument frequently operates can be between 1/2 and 3/4 of the scale range.

5. The length of the protective tube immersed in the measured medium must be greater than the length of the temperature sensing element to ensure measurement accuracy.

6. Do not use for measuring media in open containers.

7. Pay attention to checking during use, which will take about 6 months.