- Phone
-
Address
Building 1, 76-78 Zhucun Avenue West, Zengcheng, Guangzhou
Product Categories
Guangzhou Sairui Testing Equipment Co., Ltd
Capacitor surge voltage test bench
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The capacitor intermittent testing system, 58XXSV series capacitor surge voltage test bench, is a device that uses a DC power supply to perform charge and discharge tests and durability tests on capacitors. It has three channels for independent operation and control. Panasonic PLC programmable controller (FP-X C38AT) is selected for control. Each channel is measured through the PLC built-in A/D conversion module, and the built-in D/A control. All parameters and the working status of the instrument are displayed and set on the 7-inch color touch screen (MT6070iH5) of Willon Tong, Taiwan, China, China; Equipped with overvoltage protection and overcurrent protection functions, ensuring the reliable operation of the entire test bench.
Product Details
Product model display of capacitor intermittent testing system
Product features and functions
1. Suitable for the requirements of clause 4.6.17 in GB2693-1986 and GJB603-1988 standards;
2. Conduct charging and discharging tests on capacitors using direct current voltage;
3. Multiple independent outputs can meet the simultaneous testing of multiple test samples;
4. Adopt programmable logic controller (PLC) control;
5. Use a 7-inch color touch screen to display and set parameters (charging and discharging time, charging and discharging times);
6. The output voltage starts from zero volts and automatically shuts down after the preset number of cycles is completed;
7. It has overcurrent and overvoltage protection functions.
Technical parameters
1. Input voltage: AC 220V ± 10%;
2. Input frequency: 50Hz/60Hz;
3. Working environment: temperature: 10 ℃~40 ℃, humidity: less than 75% RH;
4. Power fuse: 30A;
5. Dimensions: 600 (W) × 600 (D) 1400 (H);
6. Weight: Approximately 50kg.
Technical indicators:
1. Test types: charge discharge test and durability test;
2. Output surge voltage: 0-500Vdc;
3. Display voltage accuracy: ± (2%+3 words);
4. Output surge current: 3Adc (not adjustable);
5. Charging and discharging time setting range: 0~9999S;
6. Durability time setting range: 0~9999.9H;
7. Time accuracy: ≤ 1%;
8. Charging and discharging change time: ≤ 1sec;
9. Preset cycle test times: 1 to 9999 times, set arbitrarily;
10. Charging and discharging methods: connected to a 1K Ω resistor for charging and discharging or an external resistor;
11. Number of output channels: 3 groups, each set independently and working independently.
