Welcome Customer !

Membership

Help

Beijing Kangansen Instrument Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products
Product Categories

Beijing Kangansen Instrument Technology Co., Ltd

  • E-mail

    info@conasen.com

  • Phone

  • Address

    2-1702, Beichen New Era Building, No. 13 Beiyuan Road, Chaoyang District, Beijing

Contact Now

Capacitive liquid level switch SWITCH-TEK series LP15

NegotiableUpdate on 05/17
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

● The protection circuit can optimize the detection performance in easily scaling media ● Compatible with Smart Trak and Switch Pak installation accessories ● The 60VA relay can be controlled to be normally open or closed through the polarity of the power wiring ● Adopting PP material immersion sensors and cables, suitable for corrosive liquids

Product Details

Product Introduction

The FLOOLINE capacitor level switch SWITCH-TEK series LP15 is a universal point type level switch that uses a 1-channel 1A relay output to reliably detect high or low levels of water-based conductive liquids with mild coverage, crystallization, or scaling. Applicable media include copper sulfate and saltwater. The RF protection circuit can eliminate the signal path of the covering layer between the active electrode and the reference electrode. Immersion level sensors are made of polypropylene (PP) material and are usually installed on non-metallic tank walls or inside storage tanks for high or low level alarms.

Technical Specifications

Installation location: Universal

Accuracy: ± 1mm in water

Repeatability: ± 0.5mm in water

Insulation range:>20 constants

Conductive range:>100 micro ohms

Supply voltage: 12-36VDC

Power consumption: maximum 25mA

Contact type: (1) SPST relay

Contact capacity: 60VA, maximum 1A

Contact output: normally open or normally closed optional

Protection level: NEMA 6 (IP68)

Temperature range: -40 ° C to 80 ° C

Cable length: 3m

Cable type: # 22 American 4-core shielded

Installation interface: 3/4 "NPT (3/4" G)

Installation gasket: Viton (G-thread only)