Calibration instrument portable electronic soap film flowmeter

1、 Product Introduction
JCL-2010(S)seriesCalibration instrument便Portable electronic soap film flowmeterIt is Qingdao Juchuang Environmental Protection Equipment Co., LtdJCL-2010On the basis of the series flowmeter*The newly launched updated product is suitable for detecting the flow rate of any gas or liquid, and is an instrument for calibrating medium and small gas flow meters in departments such as environmental protection, labor hygiene, scientific research, industrial and mining, and various universities. Users can achieve range adjustment by selecting instruments with different ranges0.1ml/min～30L/minMeasurement of gas or liquid flow rate within a certain range. The instrument has calibration functions for temperature, pressure, and volume, and users can calibrate them themselves*JJG 586-2006Verification Regulations for Soap Film Flowmeters.JCL-2010(S)The series of portable electronic soap film flow meters are mainly used for:
Measurement and calibration of atmospheric sampler flow rate;
Measurement and calibration of dust sampler flow rate;
Measurement and calibration of carrier gas and auxiliary gas flow rate in gas chromatography;
Measurement and calibration of rotor flowmeter;
Measurement and calibration of orifice flow meters;
●LCRMeasurement and calibration of flow rate using a testing instrument;
Measurement and calibration of flow rate of flue gas sampler.
Product Selection:

JCL-2010(S)-A: School1-1000ml/min
JCL-2010(S)-B: School2-2000ml/min
JCL-2010(S)-C: School5-5000ml/min
JCL-2010(S)-D: School0.03-30L/min
JCL-2010(S)-E: School0.1-100ml/min(Microflow calibration)
JCL-2010(S)-F: School5-50L/min

JCL-2010(S)-G: School6-6000ml/min

If there are other ranges available for selection
2、 Product Features
★ Microcomputer program control, automatic data processing, can fully display information such as air pressure, temperature, volume, time, flow rate (including volume flow rate and mass flow rate), upper and lower sensor status, etc
★ Fault self check, can simultaneously measure the luminous flux of the upper and lower sensors. Users can adjust the resistance of the internal potentiometer to achieve*Excellent sensitivity for use.
★Calibration instrument便Portable electronic soap film flowmeterReal time monitoring of battery level and display real-time charging information indicating instrument battery level.
★ It integrates sensors, soap film tubes, and circuit systems, with small size, light weight, and easy portability.
★ Measurement accuracy: △Q＜±1%
★ Repeatability: ＜0.5%
★ Traffic accuracy:0.1ml/min
★ Time accuracy:0.1S
★ The nominal value of the interior is4.8V1800mA/hRechargeable battery, standby after fully charged24h,Charging times>500time
★ External connection9VDC power supply. When the battery is depleted, this power supply can be plugged into the back panel of the flowmeter for replacement use. At the same time, the battery is charged through an internal charging circuit, and the instrument automatically enters a float charging state after charging3Fully charged in about an hour.
★ Implement the concept of energy conservation,10Stop the operation in seconds, turn off the backlight on the display screen,5If there is no operation within minutes, it will automatically shut down to achieve energy-saving management
★ Dimensions:90mm×150mm×280mm

★ Weight: Approximately0.6kg

★ The instrument has won the national utility model certificate

Optional dust sampler conversion head, calibrate dust sampler flow rate

More models, equipment requirements, and discounted quotes
Please consult TEL: 131-27012891