Cable type float level switch

NegotiableUpdate on 05/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The cable type float level switch adopts a high sealing performance float switch. This cable float level switch/float switch is suitable for controlling the operation of liquid pumps, adjusting liquid levels, and can also be installed in submersible pumps to control and protect electric motors. High sealing performance is ensured by injecting polypropylene.

Product Details

Cable type float level switchIt is a switch that can adjust the liquid level in a bucket, tank, or well. It can be automatically adjusted, easy to operate, convenient to install, safe and reliable, maintenance free, non-toxic and environmentally friendly. It has a resistance effect on sewage and is widely used in water tanks, oil, acid and alkali tanks, barrels, tanks, irrigation containers, etc. in households, factories, mines, etc.

Cable type float level switchTechnical parameters:

Rated current: 16 (8) A, 16 (4) A, 10 (8) A, 10 (4) A;

Voltage: 12V~250V;

Operating temperature: ≤ 55 ℃;

Waterproof rating: IP68;

Control range: ≥ 0.6M; working life: ≥ 50000 times;

Lead length: ≥ 1M (special lengths and specific usage environments can be customized)

Working Principle:

Cable type float level switchDesigned using the principles of gravity and buoyancy. It mainly includes a floating body, a large capacity micro switch set inside the floating body, a driving mechanism that can turn the switch on and off, and a three core cable connected to the switch. Features: Stable and reliable quality, no misoperation caused by liquid level fluctuations, corrosion resistance, long service life, easy installation, affordable price.

Installation method of heavy hammer:

1. After threading the cable of the float switch through the concave circular hole in the center of the heavy hammer, gently push the heavy hammer to make the plastic ring embedded above the circular hole fall off due to the pushing force of the cable head. If necessary, you can also use a screwdriver to remove this plastic ring. Then put the detached plastic ring on the cable to fix the weight hammer as desired and set the position of the liquid.

2. Gently push the hammer to pull out the cable until the center of the hammer grips the plastic ring. As long as the hammer lightly grips the plastic ring, it will not slip off.