-
E-mail
429864082@qq.com
-
Phone
13833708950
-
Address
Guozhuang Industrial Zone, Xian County, Cangzhou, Hebei Province
Product Categories
Xian County Keyu High speed Railway Instrument and Equipment Factory
Cable tray impact tester
NegotiableUpdate on 01/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
This device for cable tray impact testing complies with the requirements of JB/T10216-2013 and GB/T21762-2008 for impact testing equipment for steel trays, fiberglass trays, and aluminum alloy trays. It is suitable for mechanical impact strength testing equipment and can perform impact testing on cable trays of different sizes. The entire device is adjustable up and down. This device has the advantages of simple operation, convenient use, and quick installation.
Product Details
QJCJ-10J-shapedCable tray impact tester
Instruction Manual
1、 Product description:
This device complies withThe requirements of JB/T10216-2013 and GB/T21762-2008 for impact testing equipment for steel cable trays, fiberglass cable trays, and aluminum alloy cable trays are applicable tomachineMechanical impact strength testing equipment, capable of impacting cable trays of different sizesExperiment,Overall adjustable up and down. This device has the advantages of simple operation, convenient use, and quick installation.
2、 Composition of mechanical collision tester:
1. Rack: The rack is welded together with profiles and steel plates to ensure the required rigidity of the standard rack
2. Hammer head,
3. Hammer head lifting mechanism
4. Composed of hammer head limit and release mechanism (impact height), etc
3、 Technical parameters:
1. Swing rod: length 1000mm, equivalent mass to the hammer head
2. Hammer head size: ¢ 80mm * 137mm, Impact head R50
3. Equivalent mass: 10J
4. Equivalent weight: 5KG
5. Drop height: 200mm
6. Dimensions: Length 680mm * 620mm * 2040mm (length * width * height)
4、 Usage:
1. Place a thick wooden board on the plane of the wall and attach three 250mm long cable trays onto the board. (Stable clamping)
2. Impact location: Three specimens are subjected to impact tests on the bottom and two sides respectively, with the impact locations being the middle of the bottom and two sides (the layout of the impact specimens is shown below)
QJCJ-10J-shapedCable tray impact tester
Instruction Manual
1、 Product description:
This device complies withThe requirements of JB/T10216-2013 and GB/T21762-2008 for impact testing equipment for steel cable trays, fiberglass cable trays, and aluminum alloy cable trays are applicable tomachineMechanical impact strength testing equipment, capable of impacting cable trays of different sizesExperiment,Overall adjustable up and down. This device has the advantages of simple operation, convenient use, and quick installation.
2、 Composition of mechanical collision tester:
1. Rack: The rack is welded together with profiles and steel plates to ensure the required rigidity of the standard rack
2. Hammer head,
3. Hammer head lifting mechanism
4. Composed of hammer head limit and release mechanism (impact height), etc
3、 Technical parameters:
1. Swing rod: length 1000mm, equivalent mass to the hammer head
2. Hammer head size: ¢ 80mm * 137mm, Impact head R50
3. Equivalent mass: 10J
4. Equivalent weight: 5KG
5. Drop height: 200mm
6. Dimensions: Length 680mm * 620mm * 2040mm (length * width * height)
4、 Usage:
1. Place a thick wooden board on the plane of the wall and attach three 250mm long cable trays onto the board. (Stable clamping)
2. Impact location: Three specimens are subjected to impact tests on the bottom and two sides respectively, with the impact locations being the middle of the bottom and two sides (the layout of the impact specimens is shown below)
Similar Product Recommend
