Cable identification device

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The XZC-180 cable identification device is designed for power cable engineers and cable workers to solve technical problems in cable identification. Users can accurately identify one of the target cables from multiple cables through the instrument, avoiding serious accidents caused by accidentally sawing live cables. Cable identification starts from the operation at both ends of the cable, and it is necessary to ensure the accuracy of the double numbering at both ends of the cable. This instrument design adopts PSK technology. No matter how reliable the memory of on-site staff is, it cannot replace the recognition of professional instruments.

Product Details

DGC-180Cable identification deviceIt is designed for power cable engineers and cable workers to solve technical problems in cable identification. Users can accurately identify one of the target cables from multiple cables through the instrument, avoiding serious accidents caused by accidentally sawing live cables. Cable identification starts from the operation at both ends of the cable, and it is necessary to ensure the accuracy of the double numbering at both ends of the cable. This instrument design adopts PSK technology. No matter how reliable the memory of on-site staff is, it cannot replace the recognition of professional instruments. This product is only suitable for on-site identification of cables that have been powered off. It is strictly prohibited to use this productCable identification deviceConnect the running power cable! This instrument consists of a transmitter, receiver, flexible current clamp, etc.

The transmitter uses the principle of pulse current to inject pulse encoded current signals into the cable core. This current generates an electromagnetic field around the target cable for the receiver and flexible current clamp to detect, decode, and identify; Due to the directionality of current, detection also has directionality. The transmitter adopts an integrated toolbox design, using polypropylene plastic as raw material and adding new composite fillers for one-time injection molding. It has low density, strength, rigidity, hardness, wear resistance, heat resistance, and insulation performance. Its box can withstand a pressure of about 200kg. The host's ultra large LCD displays the remaining battery level in real time, with white backlight and dynamic indication of the transmission signal, making it clear at a glance.

The receiver is a handheld device with a 3.5-inch color LCD screen and a built-in high-speed microprocessor that recognizes and decodes the pulse encoded current signal from the transmitter. Electronic dial indicates signal strength, exquisite and intuitive; Color grating dynamic display, clear at a glance, can quickly and automatically identify the target cable. It also has AC voltage detection function, with a range of AC 0.01V to 600V (50Hz/60Hz).

The flexible current clamp is a Rockwell coil with transient tracking capability, which can quickly identify the pulse encoded current generated by the transmitter and is suitable for thick cables or irregularly shaped conductors. The inner diameter of its clamp is about 200mm, and it can clamp cables with a diameter of less than 200mm without disconnecting the measured line. It is a non-contact measurement that is safe and fast.

II Technical Specifications

1. Transmitter specifications

Function	Generate pulse encoded current signals; Display remaining battery voltage
Power supply	11.1V large capacity rechargeable lithium battery, can work continuously for about 8 hours when fully charged
display mode	Large LCD real-time display of remaining battery voltage
pulse voltage	500V
pulse current	Large 30A (depending on the size of the circuit resistance)
pulse frequency	Once per second
pulse width	2ms
transmit signal	Bar chart dynamically displays the emission signal
Test line length	5 meters, with crocodile clip, 1 red and 1 black clip each
Operating Temperature	-10℃～40℃
Storage conditions	-20 ℃~50 ℃, ≤ 95% RH, no condensation
backlight control	Yes, white backlight
Size	320mm×275mm×145mm
LCD size	128mm×75mm
LCD display domain	124mm×67mm
Instrument quality	Transmitter: 2.5kg
Instrument quality	Total weight: 3.3 kg (including receiver)
outer packaging dimensions	Length, width, and height: 400mm × 245mm × 335mm
battery level	When the battery voltage is below 9.65V, the low battery voltage symbol is displayed, reminding to charge the battery; When the voltage drops below 9.5V, the device automatically shuts down
Charger	12.6V DC charger
charging port	Circular charging interface, DC identification
Stress resistance	The transmitter adopts an integrated toolbox design, and the box can withstand a pressure of about 200kg
Voltage resistance	AC 3700V/rms (before the top and bottom of the instrument box)
electromagnetic properties	IEC61326(EMC)
Refer to safety regulations	IEC61010-1 (CAT III 300V, CAT IV 150V, Pollution Level 2)

2. Receiver specifications

Function	Cable identification (identifying and decoding pulse current signals); AC voltage measurement
Power supply	7.4V large capacity rechargeable lithium battery, USB charging interface, can work continuously for about 8 hours when fully charged
rated current	About 180mA max
display mode	3.5-inch true color LCD screen display, color electronic dial indicator
Cable identification successful	Green grating clockwise dynamic indication
Non target cable	Red orange grating counterclockwise dynamic indication
How many sizes are received	Length, width, and thickness 207mm × 101mm × 45mm
Flexible coil	Approximately 630mm in length, with a wire diameter of 6mm or 12.5mm
inner diameter of the coil	φ200mm
lead length	Flexible coil lead length: 2m
Voltage testing line	1m in length (1 red and 1 black)
Testing Scope	The coil can detect pulse signals with circuit resistance ranging from 0 Ω to 2k Ω; When the resistance of the detection circuit is 2k Ω, it is necessary to ensure that the battery level of the transmitter is above 10V
voltage range	AC 0.01V～600V(50Hz/60Hz)
voltage accuracy	±1%±1dgt
signal recognition	Color grating dynamic display signal intensity
Detection rate	About once per second
gain adjustment	Level 5, adjust the signal amplification factor by pressing the left and right arrow keys. The pointer should be in the middle to two-thirds of the electronic dial for better effect
backlight control	Press the up and down arrow keys to adjust the LCD backlight brightness
Auto Shutdown	After about 15 minutes of startup, the instrument panel automatically shuts down to reduce battery consumption
battery voltage	When the battery voltage is below 6.5V, the low battery voltage symbol is displayed, reminding to charge the battery
Charger	9V DC charger
charging port	USB charging port
Working temperature and humidity	-10℃～40℃； Below 80% Rh
Storage temperature and humidity	-10 ℃~50 ℃, ≤ 95% RH, no condensation
Receiver quality	Receiver: 370g (with battery)
Receiver quality	Current clamp: 172g
Insulation	The distance between the instrument circuit and the sheath shell is ≥ 100M Ω
Suitable for safety regulations	IEC61010-1 CAT III 600V, IEC61010-031, IEC61326, Pollution Level 2