CTSZ-60B Fully Automatic Acid Steaming and Cleaning Machine

In the cleaning of vessels used for detection projects such as ICP-MS, atomic fluorescence, atomic absorption, etc., most of them are soaked in acid tanks or hot acids. This method has low efficiency, high acid consumption, and repeated acid changes can also cause inconvenience in work. Yonghe Chuangxin fully automatic acid steaming and cleaning machine uses high-purity acid vapor generated by acid heating to condense at low temperature on the inner and outer surfaces of the cleaning chamber and vessel, with one-way reverse flow, taking away the residual ions attached to the vessel surface, and then steaming with ultrapure water

Steam against the current to clean the surface of the vessel.

Characteristics of fully automatic acid steaming cleaning machine：

The entire cleaning chamber is made of TFM PTFE integrated molding, which is corrosion-resistant and leak proof; Other metal parts are coated with Teflon, suitable for acidic environments, including nitric acid, hydrochloric acid, and other types of acids;

The heating part uses high-purity graphite, with a maximum heating temperature of 240 ℃. The bottom of the graphite furnace is insulated, and the bottom temperature does not exceed 60 ℃ (when the furnace temperature is 180 ℃);

Microcomputer control, 5-inch touch screen operation. It can achieve fully automatic acid addition, acid discharge, water addition, drainage, and drying; Stepwise temperature control and controllable heating rate;

The acid cleaning rack adopts a hollow structure supporting steam nozzle, which can clean 35-60 digestion tanks and other vessels at once; The material is imported PFA material, and the cleaning rack can be customized according to needs, with optional upper and lower layers for cleaning more vessels;

It has over temperature protection, timed automatic heating stop function, and can provide alarm prompts for corresponding problems;

The surface contact acid vapor concentration of the cleaning container is 100%. All internal contact parts are made of high-purity PTFE material, and the cleanliness can reach PPB level; Normal cleaning time is 4 hours;

It can be combined with a fully automatic vessel cleaning machine to form a complete laboratory automatic trace cleaning system.