CNC oil mist collector filter element 350 * 400

CNC oil mist collector filter element 350 * 400

1、 Core parameters

• size: φ 350 × 400mm (outer diameter × height), inner diameter approximately 240mm

• filter media：Fiberglass Composite/Polyester Fiber(Optional)Anti static/flame retardant/PTFE coating）

• filtration accuracy：0.3–5μmEfficiency in intercepting oil mist particles≥99.9%

• filtration areaAbout 4㎡Adapt to air volume800–1200m³/h

• Operating Temperature：-5 ℃ to 120 ℃, resistant to cutting oil/emulsion corrosion

• structureFolding filter layer+metal inner and outer mesh,Galvanized/stainless steel end caps, equipped with sealing rubber rings

2、 Performance characteristics

1. Efficient oil mist removalFor CNC high-speed cutting oil mist, oil fume, and dust, multi-stage purification is available, and the exhaust can be directly discharged indoors.

2. Low resistance and high dust holding capacityWide pleated design, low wind pressure, large pollutant capacity,long lifespanReduce the frequency of replacement.

3. Safe and Durable: OptionalAnti static filter material(Anti oil mist static electricity)flame-retardant material(UL94 V-0, suitable for dry cutting/high temperature).

4. Washable and reusableMetal frame+water-resistant filter material, reusable for low-pressure air blowing/water washing, reducing costs.

5. Universal AdaptationCompatible with mainstream oil mist collectors (such as LOF, Skoman, Core Boundary, etc.),direct replacementNo need to change the machine.

3、 Applicable scenarios

• CNC machining center, CNC lathe, turning milling composite

• Grinding machine, engraving machine, cleaning machine, cold heading machine

• Centralized oil mist purification system, workshop oil fume recovery equipment

4、 Installation and replacement

• Installation method：Flange installation/screw lifting/chuck fixationBoth ends are sealed to prevent air leakage.

• replacement cycle: Normal operating conditions2000-3000 hoursHigh concentration oil mist1000-1500 hours；Pressure difference ≥ 250PaSuggest replacement.

5、 Customized options

• Size adjustment: outer diameter320–380mmHeight350–450mm

• Filter material upgrade:(Waterproof and oil resistant), metal fiber (temperature resistance ≤ 200 ℃)

• End cap/skeleton:304 stainless steel (no copper zinc), galvanized carbon steel

CNC oil mist collector filter element 350 * 400