CNC machining center oil mist filter element 300 * 350

CNC machining center oil mist filter element 300 * 350

Specification: φ 300 × 350mm (outer diameter × height)Specially designed for CNC machining centers, CNC lathes, grinders and other equipmentOil mist/fume purificationDesign and adapt mainstream oil mist purifiers and centralized oil fume recovery systems.

1、 Core parameters

• size: Outer diameter 300mm x height 350mm (inner diameter approximately 190-200mm)

• filter media：Composite fiberglass/polyester fiber(Optional anti-static/flame-retardant), outer perforated mesh protection

• filtration accuracy：0.3–5μmEfficiency in intercepting oil mist particles≥99.9%

• filtration area: About10–12㎡Ventilation rate700–1000m³/h

• Operating Temperature：-5 ℃ to 120 ℃Resistant to emulsion and cutting oil corrosion

• structure：Folding filter layer+metal internal/external networkMetal end caps at both ends, compatible with quick release/flange installation

2、 Performance and Features

1. Efficient oil mist removalRegarding CNC high-speed cuttingFine oil mist, oil fume, dustMulti level interception, purified air can be directly discharged indoors.

2. Low resistance and high dust holding capacityWide pleat design, low wind resistance, large pollutant capacity,Long service lifeReduce the frequency of replacement.

3. Anti static/flame retardant: OptionalAnti static filter materialSuitable for oily oil mist;flame-retardant materialSafer and suitable for dry cutting/high temperature working conditions.

4. Washable and reusableMetal frame+water-resistant filter material,Low pressure air blowing/water washingCan be reused later to reduce costs.

5. Strong adaptabilityCompatible with most brands of oil mist purifiers (such as LOF, Skoman, etc.),direct replacementNo need to change the machine.

3、 Applicable scenarios

• CNC machining center, CNC lathe, turning milling composite

• Grinding machine, engraving machine, cleaning machine, cold heading machine

• Centralized oil mist purification system, workshop oil fume recovery equipment

4、 Installation and replacement

• Installation method：Flange installation/screw lifting/chuck fixationBoth ends are sealed with rubber rings to prevent air leakage.

• replacement cycle: Normal operating conditions2000-3000 hoursWhen the concentration of oil mist is high1000-1500 hoursWhen the pressure difference is ≥ 250Pa, it is recommended to replace it.

5、 Customized options

• Size adjustment:φ280–320mm, height300–400mm

• Filter material upgrade:Dongli PTFE film (waterproof and oil resistant), metal fiber (high temperature resistant)

• End cap/skeleton:304 stainless steel, galvanized carbon steel

CNC machining center oil mist filter element 300 * 350