CBJ52 Explosion proof Fire Emergency Light

CBJ52 Explosion proof Fire Emergency LightScope of application

Suitable for Zone 1 and Zone 2 explosive gas environments;

Suitable for Zone 20, Zone 21, and Zone 22 environments with combustible dust;

Suitable for Class IIA, IIB, and IIC explosive gas environments;

Suitable for environments with temperature groups T1~T4;

There are four types to choose from: A, B, C, and D;

Suitable for explosive hazardous environments such as petroleum extraction, storage, chemical, medical, and facilities.

CBJ52 Explosion proof Fire Emergency LightSeries Attention

1. This series of lighting fixtures does not come with a light source at the factory and is provided by the user themselves;

2. The conventional products of this series of lamps are grade IIB. If grade IIC is required, please specify;

3. Conventional supply of gas explosion-proof products is grade IIB. If grade IIC is required, please specify when placing an order;

4. Please select the light source type, power, and accessories item by item when placing an order;

5. The technical parameters of each specification product may vary. When placing an order, please select the appropriate product based on the usage location, emergency type, light source power, installation method, and explosion-proof level.

Product Features
1. Cast aluminum alloy shell with surface spray coating.
2. The normal lighting and emergency lighting in the emergency light are independent and suitable for installation in places where installation conditions permit; Emergency dual-purpose lighting, with normal lighting and emergency lighting sharing the same lamp body and independent light sources.
3. Equipped with maintenance free nickel cadmium battery pack, it automatically charges under normal power supply, and emergency lights automatically turn on in case of power outage or power failure.
4. Steel pipes or cables can be used for wiring.
5. Test buttons and indicator lights can be set according to user requirements.
6. Complies with the requirements of GB3836-2000 and IEC60079 standards.

product appearance

The shell is made of aluminum alloy die-casting, and the surface is treated with high-voltage electrostatic powder spraying;

High strength tempered glass lampshade;

The protective net is treated with galvanizing and dipping, which is beautiful, durable, and has good anti-corrosion performance;

Exposed fasteners are made of stainless steel material;

Equipped with maintenance free battery pack, it automatically charges under normal power supply, and emergency lights automatically turn on in case of power outage or power failure;

The emergency light automatically switches to emergency mode and is designed with overcharge and overdischarge protection circuits;

Steel pipe or cable wiring.