CAP-3024 oil level gauge for dual chamber balanced container level gauge

Product Name:CAP-3024 oil level gauge for dual chamber balanced container level gauge

CAP-3024-S1000L oil level gauge productDescription:

CAP-3024S1000LThe intelligent capacitive level gauge is made using advanced RF capacitance detection technology, supplemented by industrial grade range measurement system temperature drift compensation technology. In addition to inheriting the advantages of traditional capacitive level detection technology, it also solves the problems of large temperature drift, poor detection linearity, and poor resolution that traditional capacitive level meters cannot overcome in measurement systems. It can be applied to measure the liquid level of soluble media with relatively stable components in various industrial environments, as well as dry powder and particle level measurement. CAP-3024-S1000L Intelligent Capacitive Level Gauge

CAP-3024 oil level gauge for dual chamber balanced container level gaugeWorking principle

By utilizing the proportional relationship between the change in object (liquid) level and the capacitance change generated by the measuring probe, the detected capacitance change is compensated for by the temperature drift of the measuring system, and then processed by a dedicated mode system software to output a two-wire 4-20mA analog current loop and four sets of SPS T (N O) solid-state relay contacts proportional to the change in object (liquid) level.

CAP-3024-S1000L Oil Level Gauge TechnologyCharacteristics

1. Two wire current loop, with the measurement system isolated from the current loop;

2. Automatic compensation for temperature drift in the measurement system;

3. Convenient two-point calibration;

4. Good electromagnetic compatibility characteristics;

5. Continuous measurement of liquid level, material level, and interface;

6. Excellent linear measurement with smaller resolution measurement units;

7. Low power consumption, no moving parts, and excellent craftsmanship guarantee;

8. Resistant to high temperature, high pressure, and strong corrosion;

9. Chinese operating environment, easy tuning, with self diagnosis.

Technical indicators

Working voltage: 18~36VV (CAP-3011-R, output 3.5mA)

15V CAP-3011-S, When outputting 3.5mA)

10V (when outputting 22mA)

Current loop: Two wire system 3.5mA~22mA

Fault alarm current: 3.5mA or 22mA can be set

Isolation performance: The measurement system is isolated from the current loop

Explosion proof rating: (-40 ℃~70 ℃)

（-40℃～85℃）

Explosion proof parameters:

Power input:

Ui=30V,Ii=100mA ,Pi=0.75W

Ci=100pF,Li=10uH

Solid state relays (per group):

Ui=30V,Ii=100mA,Pi=0.75W

Ci=150pF,Li=10uH

Measurement range: 0-30 meters

Measurement cycle: 0.5 seconds

Resolution: 0.02mm

Temperature drift: ± 0.5mm (-40 ℃~85 ℃)

Work pressure: 6MPa Max

Linear deviation: ± (1+0.05% FS) mm

Solid state relay (CAP-3011-R):

Configuration: Four sets of SPST (NO) solid-state relays

Load voltage: 220V AC/300V DC (non explosion proof locations)

30V DC/AC (explosion-proof location)

Load current: 100mA (-40 ℃~40 ℃)

50mA （-40℃～85℃）

Alarm mode: "On/Off alarm" optional

Five independent alarm modes to choose from

Delay: 1-60 seconds, independently programmable

Medium temperature: -150 ℃~150 ℃

Environmental temperature: -40 ℃~85 ℃

-40℃～70℃

Storage temperature: -55 ℃~100 ℃

Communication protocol: HART

Protection level: IP65

Various atmospheric source water, soft water, and treated water systems

Measurement and control of liquid levels in various high-pressure normal water systems.

Measurement and control of light oil and lubricating oil levels.

Polypropylene, polystyrene, nylon, and PVC particle level measurement and control.

Dry coal powder, coal ash, fossil powder, cement powder, and powder level measurement and control.

Oil water boundary measurement and control.