British Alpha Dew Point Meter

British Alpha Dew Point MeterFeatures:

User friendly design, functionality*

auto-calibration

RS 485 serial communication


British Alpha Dew Point MeterTechnical Specifications:

Measurement principle of Alpha dew point meter in the UK: alumina capacitance hygrometer

Range: -110 ℃~+20 ℃

Accuracy: ± 2 ℃

Protection level: IP 66

Certification: CE, Atex

Environmental temperature: storage, -50 ℃~+70 ℃; Operation, 0 ℃~+55 ℃

Working humidity: 10~95% RH, non condensing

Power supply: 220VAC, 50Hz, 7.5W

2 independent, freely programmable alarm relays

Linear current or voltage relay signal

The sensor connection line can be up to 1km long

Calibrate according to national or standard standards

Relay output: single point, double throw, 120/240V, 50/60Hz, 2A, internal isolation

Linear (relay) output: 0~5V, 0~10V, 1~5V, 2~10V, 4~20mA

Our company supplies Alpha dew point meters from the UK, which are imported dew point meters. For more information about Alpha dew point meters from the UK, please call us for consultation.

Introduction to Alpha Dew Point Meter in the UK

The British Alpha Dew Point Meter is an economical and practical online dew point meter used for continuous analysis of humidity in air or other gases. Adopting * supercapacitor ADHS/1000 sensor; The front panel specification is IP65, with a 4-digit LED display showing dew point readings in ℃ or ℉ units, with a range of -80 to+20 ℃ (-112 to+68 ℉). The distance between the sensor and the instrument can reach 1000 meters.

Features of Alpha Dew Point Meter in the UK:

High quality and low price, fast response, simple operation

Accuracy ± 2 ℃ (DP)

1/8 Din disk mounting specification, front panel specification IP65

Digital display of ℃, ℉ or ppm (v)

*Interchangeable sensors

Range -80 to+20 ℃ (DP)

High precision measurement circuit

Isolate 4-20mA output, two alarm values (view/adjust settings from the front panel)

Calibration conforms to national and international standards

Order information: Standard configuration: analyzer, sensor, sensor holder, and 2-meter sensor cable

Specification and parameters of Alpha dew point meter in the UK

Installation: Flat installation with IP65 front panel

Display: 4-digit LED 14.2mm high characters

Range: -80~+20 ℃ (DP) (-112 ℉~+68 ℉ or 0~1000ppm (v) factory setting options)

Resolution: 0.1 ℃, 0.1 ℉, or 0.1ppm (v)

Alarm: Two adjustable alarm relays. Contact rated at 7A @ 240VAC or 7A @ 30VDC

Output: 4-20mA

sensor

Model: ADHS/1000 alumina supercapacitor sensor with IP65 connector

Range: -80 ℃ to+20 ℃ (or -112 ℉ to+68 ℉)

Accuracy: ± 2 ℃ (DP)

Pressure: Maximum pressure of 50 bar (optional high-pressure model)

Cable: Standard provides 2-meter cable; Up to 1000 meters in length

Sensor Seat

Model: ADSH - Stainless Steel, 1/8

Working conditions: -10 ℃~+50 ℃, 10-90% RH non condensing

Voltage: 90-250VAC; 50/60Hz, 6VA (maximum)