Breathing valve baffle

Breather valve baffle (FCI type)

FCI Type Breathing Valve Flap

Installation method:

Install the breather valve on the top of the oil tank

① Remove it (as shown in the figure, the same below), and then remove the baffle

⑤ Folding from the joint tube

③ Send in

④ Flatten the inside, then place the fixed plate at the center of the joint pipe flange, and connect the static grounding wire

② Press the gasket under the connecting bolt of the breathing valve, and then reinstall the breathing valve.

1. The breathing valve baffle is lifted below the joint pipe between the breathing valve and the oil tank to reduce the loss of oil and gas leakage during the breathing process.

2. Please indicate the name, specifications, and model when placing an order. The actual height of the tank top joint pipe is n.

Installation method:

① the respiration valve oil(as shown, similarly hereinafter)remove,and then will dampers

⑤ from folding conjugation tube

③④ into within opened out,and will be fixed board dish in conjugation tube flange center,the static grounding lines

② in the respiration valve gasket pressure below the connecting bolts,and then will the

respiration valve to install a good can.1 the reducebig breath process of oil and gas spill

losses,2.ordering,please specify name specification,type,potactual height n conjugation tube.