Box type pre oxidation treatment furnace heating furnace non-standard equipment

ZYMSP-P600Box type pre oxidation treatment furnace heating furnace non-standard equipmentSpecially designed for high-temperature heat treatment of carbon fiber materials below 350 ℃, the kiln design fully considers and understands the preparation process requirements of short fiber carbon fiber materials, and strives to meet their key special requirements as much as possible. Independently designed according to the preparation process requirements of the material, the furnace adopts hot air circulation heating method, and the insulation material adopts ultra lightweight material for thermal insulation; The temperature control adopts imported single loop single point temperature controller, which has the characteristics of high temperature control accuracy and stability; The overall energy consumption of the equipment is low, and the appearance is neat.

A.working principle

Box type pre oxidation treatment furnace heating furnace non-standard equipment,The pre oxidation furnace is divided into two parts: the preheating chamber and the oxidation furnace. Pass the air through an adjustable flow meter and quantitatively enter the preheating chamber for preheating. Fill the preheating chamber with high-temperature materials to make the incoming air more dispersed and the heating more uniform. The preheated air passes through the gas distribution plate and uniformly enters the oxidation furnace, allowing the oxidized material to undergo sufficient oxidation with the air inside the oxidation furnace.

Preheating temperature: from room temperature to250 ℃ adjustable, with a maximum working temperature of 400 ℃. Mainly used for laboratory oxidation experiments on materials

B.Performance Characteristics

lIntegrated structure, neat appearance, and small footprint.

lThe preheating chamber adopts an independent designPID constant temperature control.

lThe oxidation furnace adopts an independent designPID temperature control ensures temperature control accuracy and stability.

lPreheating chamber high temperature packing, gas can be fully preheated.

lMulti layer breathable material placement rack ensures that each layer of material can be fully oxidized.

lLightweight materials are selected as insulation materials for thermal insulation.

C.Application scope（Applicable materials）

Scope of application:

PAN based, asphalt based, adhesive based carbon fibers and their felt materials

Applicable materials:

D.Overall dimensions

E.productlive shooting