Bo Le Fei viscometer

Bo Le Fei viscometerTechnical specifications

1. A digital display viscometer specially developed for Chinese market users
2. Combining all the excellent qualities and performance of the brand
3. Accurate measurability, reliable performance, and service quality
4. Full Chinese operation panel identification, easy to operate, open the switch, turn the knob to measure
5. No calculation required, viscosity cP (centipoise) or mPa. s (millipascal second) values and torque values can be directly read
6. 18 different rotational speeds can meet different measurement ranges
7. The accuracy range is+/-0.1%, and the reproducibility is ± 0.2%, allowing you to use the same brand of product anywhere in the world and obtain * test results.
8. Randomly send DV operation training CD and full Chinese user manual.

Bo Le Fei viscometerKey Features:

The world viscometer has launched a new product in the Chinese market, BROOKField, which is synonymous with viscometers. It has established and maintained the industrial standard for viscosity measurement. The American engineering laboratory, BEL, has been established in the field of viscosity and rheometer for about 70 years, with a market share of over 70%. To meet the needs of quality testing and product research and development in China's polymer materials, coating chemical, pharmaceutical, food and other industrial fields, and to enable more Chinese users to easily and quickly master the use of viscometers

The DV-S viscometer is a new product that maintains high quality while catering to customers with tight budgets. It has the following significant features:
1： The stress sensor of DV-S is a high-density sensor; There are 4 stress sensing points per revolution, which respond quickly, while some imitation products only have one sensing point per revolution. At low speeds, the number of sensing points determines the refresh frequency of viscosity measurement data. For example, under the measurement condition of 1 revolution/minute, if there is only one sensing point, it takes 60 seconds for new data to be generated, which cannot be practically applied.
2： The rotor machining accuracy of DV-S viscometer reaches a very high level. Therefore, if one of the rotors is accidentally damaged, a new rotor can be purchased without sending the entire viscometer back to the factory for rotor viscometer pairing calibration;
3： To meet the needs of the Chinese market, the manufacturer has printed Chinese labels on DV-C products, which are exceptionally easy to operate