Battery internal resistance tester

NegotiableUpdate on 05/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

HP3561 battery internal resistance tester, internal resistance measurement range 0.01m Ω~3.200 Ω, basic accuracy 0.5%, reading 32000 numbers; Voltage testing range: 0.1mV to 20.000V, with a basic accuracy of 0.05%.

Product Details

HP3561Battery internal resistance tester--Introduction:

HP3561It is a high-precision and wide range device controlled by high-performance microprocessorsBattery internal resistance testerThe internal resistance measurement range is 0.01m Ω~3.1000 Ω, and the voltage measurement range is 1mV~20.000V.

HP3561The instrument supports multi-channel scanning testing function. By adding our company's multi-channel scanning test card, multiple batteries can be scanned and measured simultaneously.

The instrument has RS232/RS485 (optional) communication interface and is equipped with two sets of communication command protocols. When using RS232 communication, the instrument uses SCPI (Standard Command for Programmable Instrument). When using RS485 communication, the instrument uses the MODEBUS command protocol. Users can efficiently complete remote control and data acquisition functions as well as instrument networking.

HP3561Battery internal resistance tester- Main features:

3.5-inch TFT true color LCD display

Resolution 0.01m Ω, 0.1mV

Using a four wire system to test internal resistance

standard configurationRS232(Optional RS485) communication interface

High precision, good stability, testing speed up to 100 times per second

Standard Handler (I/O) industrial control interface

supportSCPIAnd Modebus (RTU)Two communication modes

Specially suitable for high-speed automatic testing systems

Application scope:

Testing of various lithium batteries such as mobile phone lithium batteries and power batteries; Determination of degradation and life evaluation of alkaline batteries and lead-acid batteries; UPS online detection; Measurement of Equivalent Resistance (ESR) of Supercapacitors; Testing of various contact resistances; Resistance testing of power cords, USB communication cables, and other wires and cables

Technical specifications of battery tester:

Battery Tester
model	HP3561	0.01mΩ~ 3.1000Ω		0.1mV～20.000V
display	3.5-inch TFT true color LCD;
Test signal source	1kHz±0.2HzAC
test parameters	communicationinternal resistance(AC-IR)Direct Current Voltage (DCV)
Communication Internal Resistance (AC-IR)
Internal resistance range	300mΩ		3Ω
Internal resistance display value	310.00		3.1000
Internal resistance resolution	0.01mΩ		0.1mΩ
Internal resistance measurement current	10mA		1mA
内阻精度	±0.5%rdg. ±5dgt
	Add ± 2 for medium/fast (MEDIUM/FAST)dgt,Add ± 3 for ultra fast (EX.FAST)dgt;
Direct Current Voltage (DCV)
Voltage range	20V
Voltage display value	±20.000V
voltage resolution	1mV
voltage accuracy	±0.05%rdg. ±3dgt
	Add during medium/fast (MEDIUM/FAST)±2dgt,Add extra fast (EX.FAST)±3dgt;
Other Functions
test speed	Slow speed: 3 times/second, medium speed: 20 times/second, fast speed: 50 times/second, ultra fast speed: 100 times/second
calibration	Short circuit reset within the full range
comparator	30Group record 7 levels, sorting and counting
	Judgment result: Resistance and voltage Hi/IN/Lo; Comprehensive judgment: (GD/NG/P1/P2/P3, grading of resistance judgment results and voltage judgment results); Screen display, buzzing, external I/O output signal
News ringing	GD/NG/OFF
trigger mode	Internal trigger, manual trigger, external trigger, automatic trigger (optional)
communication interface	RS-232C/RS-485 (optional)/Handler（PLC interface）
communication protocol	SCPI/MODBUS(optional)
power supply	Voltage:100V-240V AC Frequency:47Hz-63Hz
power	About 10VA
size	Approximately 385mm * 249mm * 102mm (L * W * H)
weight	About 2kg