- Phone
-
Address
Room 0312, Building A, Xianghe Building, Guanyinge Street, Rencheng District, Jining City, Shandong Province
Product Categories
Jining Chengying Trading Co., Ltd
Baohua filling pump
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
BAUER 680 VE Baohua filling pump is a high-pressure air compressor specifically designed for inflating respirator gas cylinders. It compresses ambient air to high pressure through a multi-stage compression system and ensures the output air is pure, safe, and meets international breathing air standards through a filtration system.
Product Details
330bar, 680 l/min
Model BAUER 680
Germany Baohua
Compressor unit BAUER 680 for Reference Only.
compressorBAUER 680 The pictures are for reference only, evenThere is no front inflatable tray when connecting to the explosion-proof cabinet
|
Model model | Capacity displacement |
Stages compression level | RPMrotation speed | Engine Motor power | Size LxWxH size | Weight weight | ||
| [l/min] | [m³/h] | [cfm] | [1/min] | [kw] | [mm] | Kg | ||
| BAUER 680 VE | 680 | 40.8 | 24 | 4 | 1400 | 15 | 1140*830* 1520 | 360 |
| BAUER 680 All | 680 | 40.8 | 24 | 4 | 1400 | 15 | 1480*830* 1520 | 450 |
Technical parameters of compressor host:
| compressed medium | Air |
| intake air temperature | +5 to +45°C |
| ambient temperature | +5 to +45°C |
| work pressure | 330 bar adjusted by safety valve Safety valve setting 330bar |
| traffic | 680 l/min |
| rotation speed | 1400 1/min |
| compression level | 4 |
| number of cylinders | 4 |
| Power consumption at maximum pressure | 15 kW |
| Drive Type | v-belt |
Technical parameters of the drive motor:
| model | three phase electric motor |
| power | 15 kW |
| protection level | IP55 |
| frequency | 50 Hz |
Standard supply scope:
● compressor main unit
* High strength aluminum alloy crankcase (efficient heat dissipation)
* Oil pump driven pressure lubrication system
* Precision lubricating oil filter
* Lubricating oil pressure monitoring sensor
* Crankcase vent pipeline with oil separator
* 5L Large oil tank oil volume: 5.0rise
* The host is equipped with a clear oil level gauge to display the oil level, which is easy to maintain
* Each stage of compression is equipped with a stainless steel cooler
* The temperature of compressed gas after passing through the cooler is approximately higher than the ambient temperaturedegree 10-15 °C
* Each stage of compression is equipped with an intermediate water oil separator (Except for the first level)
* Can withstand it 85000 Final stage water oil separation of secondary load cycleDeparture device
* Each stage of compression is equipped with a safety valve
* Final safety valve
* There are pressure maintenance valves and one-way valves installed before the outlet of the compressor
* The compressor has been fully tested before leaving the factory (no need to change the oil during the break in period)
● Automatic condensate drain
-During the operation of the compressor, all condensate from the water oil separator will be discharged
-The exhaust is equipped with a muffler and a filter 10 Raise collection box
● PURIFICATION SYSTEM P 61
● P61filtration system Integrated into the compressor
Scope of supply
- check valve
-Relief valve with pressure gauge
- 1 Equipped with an efficient filter element 27” The filter cartridge
-Pressure holding valve and check valve
- Specialized tools for filter cartridges
By replacing the filter element on time, Baohua's air quality is better than strict standardsDIN EN 12021Standard
|
threshold | |
|
| |
| oxygen(O2) | 21% +-1% |
| carbon monoxide(CO) | 5ppm |
| carbon dioxide(CO2) | 500ppm |
| Oil content(Oil) | 0.5mg/m3 |
| 水分(H2O) | 25mg/m3 |
● Compressor structure and style
-The compressor is vertically installed on a stable chassis
-Independent installation with shock absorbers (no installation foundation required)
-Wire connection:5 Rice wire;CEEPlug; Only applicable in400V / 50Hz
* 72 dB(A) ±2dB(A) (ISO 3744)
Openable silent shell side door,The degree of reduction in noise is approximately:
72 dB(A) ±2dB(A) (ISO 3744)
-High pressure outlet: fitting 8S for pipe ⑦ 8mm
High pressure outlet:8mmpipeline 8Sconnection
Regulation or control optional
SecurusFilter monitoring*optional
How to translate
Safety: When the filter element is saturated, the compressor will automatically shut down SECURUSThe system can continuously monitor the saturation level of the filter element by measuring the humidity of the molecular sieve; In the filter element, it is truly Before replacement,SECURUS Will provide a signal to ensure air quality Quality and safety. The following operating conditions will Reflected on the monitor: If the display is ignored, then
* SECURUS Can automatically shut down the machine
* Green light on: The filter element is normal
* Yellow light flashing:Warning before filter saturationRed light flashing:
:Compressor automatic shutdown protection when filter element is saturated (filter element needs to be replaced) 330bar
inflatable device 1 optional 1 Each inflation connector includes:
1 root Meter long inflatable tube An inflation valve with a venting function, and the inflation bottle connector is5/8 BSP , DIN
EN
144-2
The pictures are for reference only Operation mode:
Fully automatic (automatic start stop) or semi-automatic control
(Automatic shutdown)
The control part includes:
Star Triangle Start up; Equipped with overload protection, main switch, terminal box, and transformerMonitor oil pressure, final pressure, and condensate discharge
Manufacturing standards:According to German regulatory standards Testing standards: According to Germany DINEN
10204-3.1B
