Baoding Lange BT100-1F Distribution Peristaltic Pump

NegotiableUpdate on 01/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Baoding Lange BT100-1F distribution peristaltic pump is capable of precise quantitative distribution of liquids and can be matched with up to 4-channel DG series pump heads. It can also calibrate flow rate and distribution volume, improving the accuracy calibration function of output liquids.

Product Details

Baoding Lange BT100-1F Distribution Peristaltic Pump

The distribution type peristaltic pump BT100-1F can accurately and quantitatively distribute liquids, and can be matched with up to 4 channels of DG series pump heads. It can also calibrate the flow rate and distribution volume, improving the accuracy calibration function of the output liquid.

Baoding Lange BT100-1F Distribution Peristaltic Pump

Distribution type peristaltic pump BT100-1F is mainly used in the laboratory

This peristaltic pump is capable of precise quantitative distribution of liquids and can be matched with up to 4-channel DG series pump heads. It can also calibrate the flow rate and distribution volume, improving the accuracy calibration function of the output liquid

Equipped with a suction function, the pump can operate in reverse for a certain period of time after shutdown in the assigned working mode, preventing liquid dripping and leakage. It is convenient and fast to use

BT100-1F can install various pump heads, suitable for pump heads: YZ1515x, YZII15, YZ2515x, YZII25, DG - (1, 2, 4) 6 rollers, DG - (1, 2, 4) 10 rollers DMD15、DG15

Flow range: 0.02ml/min-500ml/min

Use LCD to display all information and parameters, and can also be controlled through buttons, foot switches, external signals, communication, and automatic control

Equipped with power-off memory function

Having CE certification system

speed range	0.1rpm-100rpm， Reversible reversal
Speed regulation resolution	0.1rpm
Control method	Knob combined with film buttons, supporting external signal control and communication control
display mode	LCD (Liquid Crystal Display)
working mode	Traffic mode and allocation mode
Flow correction	Input the actual flow value obtained from the set flow rate and automatically perform flow correction
Distribution liquid volume range	0.01mL-9.99L
Distribution liquid volume correction	Input the actual distribution liquid volume value obtained by setting the distribution liquid volume, and automatically calibrate the distribution liquid volume
Allocation frequency range	1-9999 times, "0" is an infinite loop mode
Allocation interval time range	0.1s-99.9min， Adjust resolution by 0.1s
Range of suction time	0s-99.9s， Adjust resolution by 0.1s
External control function	Start stop control, direction control, speed control (4-20mA, 0-5V, 0-10V, 0-10kHz optional)
Output of speed status signal	10Hz-10kHz corresponds linearly to 0.1-100rpm
Start stop status signal output	OC gate signal output
Direction status signal output	OC gate signal output
communication interface	RS485
power-off memory	After powering on again, work can continue according to the state before power failure
Full speed function	One click control for full speed operation, used for filling, emptying, etc
Dimensions (length x width x height)	285×207×180（mm）
Applicable power supply	AC 90V-260V/40W
Working environment temperature	0℃-40℃
Relative humidity of working environment	＜80%
Protection level	IP31
weight	3.8kg