Baby stroller nylon humidity control room

1、 Basic parameters:

1. Name:Baby stroller nylon humidity control room

2. Model: ND-200TH

3. Internal pressure range: 40 ℃~100 ℃

4. Moisture content: 50% RH~98% RH

5. Internal space: 1500 * 1000 * 1800mm

6. Control method: touch screen+PLC control

2、 Equipment features:

1. Intelligent control method, precise and convenient, with a simple and elegant appearance.

2Baby stroller nylon humidity control roomTouchscreen display, intuitive and clear.

3. One click operation, saving time and effort.

4. The equipment automatically shuts down after moisture absorption is completed.

5. After the sample absorbs moisture, it can be directly coated and used without wiping or drying.

6. Fast water saturation intelligent control technology enables controllable moisture content.

7. The surface is clean, free of water stains, color difference, and residual moisture.

8. No need for any additives, more environmentally friendly!

The water absorption rate of PA66 increases with the extension of storage time in different humidity environments; There is an exponential relationship between the tensile strength and water absorption of PA66; There is a time effect of moisture on the tensile strength of PA66. After absorbing water, the tensile strength of PA66 decreases. However, with the increase of time, the tensile strength increases to varying degrees; The degree of influence of moisture on the tensile strength of PA66 is related to environmental humidity. The higher the environmental humidity, the stronger the influence of moisture, and the greater the decrease in the tensile strength of PA66. There are two general solutions:
1. Add a boiling process after injection molding.
2. Use modified raw materials, such as adding fiberglass.
Formula for calculating moisture content: First, weigh the nylon to obtain the mass M1, then dry the nylon and weigh it to obtain the mass M2. Using (M1-M2)/M1 * 100%, the moisture content of nylon can be obtained.

Kunshan Snyder nylon products can improve their strength after moisture treatment. In terms of molecular structure, nylon molecules are water absorbing molecules, and once saturated with water, they can increase the toughness of the material PA6 PA66/6 has a relatively high water absorption rate, and the larger the proportion of amide groups, the higher the water absorption rate. After molding, it is necessary to perform humidity control treatment to reduce the impact of water absorption on the material and improve dimensional stability!